Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : High performance: Electromagnetic stirrer adopts DC brushless motor, stable performance, large stirring torque, low noise and reliable
BulletPoint2 : Collective heating: Adopting the heat collector heating method, the heated container is under strong heat radiation, the temperature is uniform, and the efficiency is high, which is more suitable for the heating treatment of spherical flasks
BulletPoint3 : Adjustable: Speed regulation range: 0-1400 RPM; Temperature control range: RT + 5-400℃
BulletPoint4 : Digital Display: Digital display instrument, intuitive temperature display. The advanced temperature control system can precisely and precisely control the temperature of the heated liquid
BulletPoint5 : Various Uses: The electromagnetic stirring heater is suitable for heating and stirring liquids in universities, laboratories. Either water bath or oil bath
ExternallyAssignedProductIdentifier : 8462002659402
IncludedComponents : Magnetic stirrer
ItemName : AGULIUM 10L Lab Heat-Collecting Magnetic Stirrer with Hot Plate, Temperature Probe, Digital Display, Thermostatic Magnetic Stirrer Water Bath Oil Bath Electromagnetic Stirring Heater(0-1400rpm)
ItemPackageDimensions_Height : 45 centimeters
ItemPackageDimensions_Length : 40 centimeters
ItemPackageDimensions_Width : 23 centimeters
ItemTypeKeyword : science-lab-stirrers
Manufacturer : AGULIUM
ModelNumber : GYMYQR
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : BI-MLCYT-2202
ProductDescription :

Parameters

• Capacity: 10L
• Voltage: 110V
• Speed regulation range: 0-1400 RPM (stepless speed regulation)
• Temperature control range: RT + 5-400℃
• Temperature control method: intelligent constant temperature
• Heating power: ≤1000W
• Stirring power: 40W
• Slot size: diameter 300mm*height 195mm
• Gross weight: 12kg
• Packing size: 32 x 32 x 32 cm
• Material: Stainless steel

Package

Magnetic stirrer 

How to Use

• 1. Turn on the power, prepare the cup, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add thermal oil or silicone oil to the appropriate height in the stainless steel container, and pour the blender into the cup solution. Turn on the power switch, the indicator light is on, and then turn the speed potentiometer clockwise to stir from slow speed to fast speed. Adjust to the desired speed.
• 2. When heating, fix the temperature probe on the bracket, and then move the bracket to insert the temperature sensor probe into the solution at least 5cm, but the stirring will not be affected. Turn on the heating switch and set the desired temperature.
• 3.The digital display lights up and the current oil temperature is displayed on the upper row of the meter. Set temperature: Press the SET button to set or check the temperature set point. Press the SET key and the numeric tube character starts to flash, indicating that the instrument enters the setting state, press △ to increase the setting value, press the ▽ key to decrease, long press the △ or ▽ key, the data will change quickly, press the SET key again, the instrument returns to the normal working state. Set up.
• 4. If the agitator jumps during work, please turn off the power and then turn it back on. The speed can be adjusted from slow to fast, and then work normally

Notes

Use a three-phase socket, and when the container is not filled with heat-conducting oil and the temperature sensor is not connected, please do not turn on the temperature control switch.

ProductSiteLaunchDate : 2024-11-08T08:17:49.558Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41000000