Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Morezmore
BulletPoint1 : Magic Sculpt two part epoxy putty.
BulletPoint2 : 2 oz sample (1 oz resin, 1 oz hardener, total of 2 oz)
BulletPoint3 : Surface may be smoothed out with water. One of the few epoxies that will smooth out with water. Water and soap clean up.
BulletPoint4 : Magic Sculpt grain structure is finer than any other product available and will not shrink or crack even when formed in large structures.
BulletPoint5 : It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Accepts all types of paint.
BulletPoint6 : Magic Sculp will set at room temperature in about 30 min and completely cure within 24 hours. Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard.
BulletPoint7 : Easily mixed, use equal parts of resin and hardener, mix until one solid color. Good adhesion to almost all clean surfaces, including glass. Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time.
BulletPoint8 : Indefinite shelf life.
BulletPoint9 : Completely inert when cured.
Color : Clear
EducationalObjective : Creative Skill
ExternallyAssignedProductIdentifier : 8436554367832
ExternallyAssignedProductIdentifier1 : 0735816309725
ExternallyAssignedProductIdentifier2 : 735816309725
ItemForm : Thick and moldable
ItemName : M00282 MOREZMORE Magic Sculpt Epoxy Putty TAN 2 oz Sample Epoxy Clay Model Putty
ItemPackageQuantity : 1
ItemTypeKeyword : modeling-compounds
ItemVolume : 200 milliliters
Manufacturer : Wesco
ManufacturerMinimumAge : 12
Material : Epoxy Clay
ModelName : M00282
ModelNumber : M00282
NumberOfItems : 1
OccasionType : Birthday
OperationMode : Manual
PartNumber : M00282
Pattern : Solid
ProductDescription : 2 oz Sample of Magic Sculp (sometimes called Magic Sculpt) by Wesco Two-part Epoxy Putty Sculpting and Modeling Compound Manufacturer Info: Welcome to Magic Sculp - the two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. One of the few epoxies that will smooth out with water. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Magic Sculp will cure at room temperature. Features: - Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard. - Easily mixed (Resin and Hardener slightly color coded: mix until one solid color). - Good adhesion to almost all clean surfaces, including glass. - Excellent malleability. - Good sculpting media: as easy to work with as oil clay. - Surface may be smoothed out with water. - Water and soap clean up. - Completely inert when cured. - Accepts all types of paint. - Surface may be sanded or ground when cured. - No measurable shrinkage. - Good for repairing anchoring bases and armature rods. - Indefinite shelf life. - Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time. - Repairs low pressure leaking pipes of plastic, cast iron, stainless steel, and copper. Morezmore Experience: Not only Magic Sculp is great for building armatures and bases because of its superiour strength but it has fine enough grain to actually sculpt from it - see the 2" tall Firefly sculpture on the picture below. To use Magic Sculp, you simply mix equal parts of the resin and hardener, then knead together until a uniform color is obtained. It can then be shaped, sculpted and smoothed with a wet finger or modeling tools. It will harden in 1 1/2 to 3 hours. Do not go into the jars with dirty hands - use separate tools! Even minute amount of the other ingredient will start the chemical reaction and will ruin all the entire jar of clay. If you think you have sensitive skin, use gloves. If gloves are not an option, wash your hands promptly after you finish working with Magic Sculp with soap and water. Do not touch your face.
ProductSiteLaunchDate : 2024-10-07T13:59:21.667Z
RecommendedUsesForProduct : Modeling
Scent : Unscented
Size : 100g
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Unisex Adult
TargetGender : unisex
Theme : Wood
UnitCount : 1
UnspscCode : 31201600