Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Morezmore
BulletPoint1 : Magic Sculpt two part epoxy putty.
BulletPoint2 : 5 Lb (2.5 lb resin, 2.5 lb hardener, total of 5 lb)
BulletPoint3 : Surface may be smoothed out with water. One of the few epoxies that will smooth out with water. Water and soap clean up.
BulletPoint4 : Magic Sculpt grain structure is finer than any other product available and will not shrink or crack even when formed in large structures.
BulletPoint5 : It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Accepts all types of paint.
BulletPoint6 : Magic Sculp will set at room temperature in about 30 min and completely cure within 24 hours. Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard.
BulletPoint7 : Easily mixed, use equal parts of resin and hardener, mix until one solid color. Good adhesion to almost all clean surfaces, including glass. Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time.
BulletPoint8 : Indefinite shelf life.
BulletPoint9 : Completely inert when cured.
Color : Grey
CompatibleMaterial : Plastic, Metal, Glass, Cast Iron, Stainless Steel, Copper
EducationalObjective : Creative Skill
ExternallyAssignedProductIdentifier : 00850065238692
FcShelfLife : 669 days
GpsrSafetyAttestation : 1
IncludedComponents : modeling compound
IsExpirationDatedProduct : 1
ItemForm : Putty
ItemName : M02051 MOREZMORE Magic Sculpt Epoxy Putty Natural Grey 5 LB Kit Epoxy Clay Model Putty
ItemPackageDimensions_Height : 20.8026 centimeters
ItemPackageDimensions_Length : 1.6002 centimeters
ItemPackageDimensions_Width : 15.0876 centimeters
ItemShape : Round
ItemTypeKeyword : modeling-compounds
Manufacturer : Wesco
Material : Epoxy Clay
ModelName : MSDE50
ModelNumber : M02051
NumberOfItems : 1
PartNumber : M02051
ProductDescription : Magic Sculp (sometimes called Magic Sculpt) by Wesco Two-part Epoxy Putty Sculpting and Modeling Compound Manufacturer Info: Welcome to Magic Sculp - the two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. One of the few epoxies that will smooth out with water. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Magic Sculp will cure at room temperature. Features: - Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard. - Easily mixed (Resin and Hardener slightly color coded: mix until one solid color). - Good adhesion to almost all clean surfaces, including glass. - Excellent malleability. - Good sculpting media: as easy to work with as oil clay. - Surface may be smoothed out with water. - Water and soap clean up. - Completely inert when cured. - Accepts all types of paint. - Surface may be sanded or ground when cured. - No measurable shrinkage. - Good for repairing anchoring bases and armature rods. - Indefinite shelf life. - Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time. - Repairs low pressure leaking pipes of plastic, cast iron, stainless steel, and copper. Morezmore Experience: Not only Magic Sculp is great for building armatures and bases because of its superiour strength but it has fine enough grain to actually sculpt from it - see the 2" tall Firefly sculpture on the picture below. To use Magic Sculp, you simply mix equal parts of the resin and hardener, then knead together until a uniform color is obtained. It can then be shaped, sculpted and smoothed with a wet finger or modeling tools. It will harden in 1 1/2 to 3 hours. Do not go into the jars with dirty hands - use separate tools! Even minute amount of the other ingredient will start the chemical reaction and will ruin all the entire jar of clay. If you think you have sensitive skin, use gloves. If gloves are not an option, wash your hands promptly after you finish working with Magic Sculp with soap and water. Do not touch your face.
ProductSiteLaunchDate : 2024-10-07T14:08:22.664Z
RecommendedUsesForProduct : Modeling
RecommendedUsesForProduct1 : Playing
RecommendedUsesForProduct2 : Modeling
Size : 1.1 Cup
SpecificUsesForProduct1 : Model
SpecificUsesForProduct2 : Repair
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31201600
Viscosity : Medium
WarrantyDescription : 1 Year
WarrantyDescription1 : 2 Year Manufacturer
WarrantyDescription2 : 2 Year Manufacturer
WarrantyDescription3 : 1
WarrantyDescription4 : No
WaterResistanceLevel : water_resistant