Cart 2 india

Specification
Brand : Environmolds LLC
BulletPoint1 : ✅ Industry's Best Mask Making Latex
BulletPoint2 : ✅ Use to Create for Hollow Props - Fake Food
BulletPoint3 : ✅ Excellent for Dip Casting Mold Making
BulletPoint4 : ✅ Use to Coat and Texture Foams for Special effects
BulletPoint5 : ✅ Can be tinted or painted
Color : Ivory White
ExternallyAssignedProductIdentifier : 4255593861590
ExternallyAssignedProductIdentifier1 : 711221973331
ExternallyAssignedProductIdentifier2 : 0711221973331
GpsrSafetyAttestation : 1
Hazmat1 : UN3082
ItemName : EnvironMolds 407 Latex Casting Rubber 32-Ounces - for Mask Making - Prop Making - Dip Molding
ItemPackageDimensions_Height : 20.9042 centimeters
ItemPackageDimensions_Length : 11.5062 centimeters
ItemPackageDimensions_Width : 12.4968 centimeters
ItemPackageQuantity : 1
ItemShape : Sphere,Ball,Round
ItemTypeKeyword : molding-and-casting-materials
Manufacturer : EnvironMolds
Material : Liquid Mask Making and Dipping Casting Latex
Material1 : Epoxy Resin
Material2 : Resin
ModelName : usa-pkl-proplus
ModelNumber : EPC00210R
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : EPC00203R
ProductDescription :

EnvironMolds 407 Casting Latex is premium latex formulated specifically formulated for the production of masks, toys, hollow molded rubber articles, toys such as balls, props to create imitation pottery, masks, puppet heads, and display articles. It is also appropriate for coating foams such as polystyrene, texturing, and general special effects for theater work.

EnvironMolds 407 Casting Latex is especially useful in making flexible props. It is also useful for dip molding.

407 Casting Latex is a one-component air-drying latex used with gypsum molds. 407 Casting latex is poured or brushed into a gypsum mold and filled to the top. It is allowed to stand for about 30 to 45-minutes, the 407 Casting Latex is poured back into its receptacle. You may achieve better results by slush casting or rolling the latex around in the mold before you pour the excess out.

407 Casting latex can be tinted in advance by adding acrylic-based paints. When tinting latex, note that colors tend to dry darker than they initially appear. Painting latex cannot be achieved with great success unless the surface is adequately prepared. That is because latex stretches, causing the paint to crack and chip. Therefore, it is best to use latex-based paints to eliminate this possibility.

407 Casting Latex Tips:
Thinning: You may thin latex by adding water (use distilled water)
Ammonia: 407 Casting Latex contains ammonia which can evaporate. Smell the latex, and if the ammonia smell has gone or diminished, add up to 26% Aqua Ammonia (from a chemical supply store). Don't use ammonia at grocery stores as it is only 2-3% and contains soap. Instead, add a little at a time, just enough to bring it back to normal.
Shipping: Latex is destroyed when it freezes. That means it requires special handling in winter weather. It must be shipped 1- or 2-day service.

ProductSiteLaunchDate : 2017-09-27T07:00:00.000Z
SafetyDataSheetUrl : https://www.artmolds.com/media/blfa_files/SDS_EnvironMolds_Mask_Making_Latex_.pdf
Size : Pint Unit
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : ghs
SupplierDeclaredDgHzRegulation2 : transportation
SupplierDeclaredDgHzRegulation3 : waste
TargetAudienceKeyword1 : Unisex Children
TargetAudienceKeyword2 : Adults
TargetAudienceKeyword3 : Consumer Audience
UnspscCode : 60141000
WarrantyDescription : Shelf life 12 months when unopened. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.