Cart 2 india

Specification
Brand : Alpine
BulletPoint : BASS800.2OHM
BulletPoint1 : Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
BulletPoint2 : Weather resistant (IP66 rating)
BulletPoint3 : 300W x 1 (2Ω, 14.4V, ≤ 1% THD+N)
BulletPoint4 : Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
BulletPoint5 : Short circuit protection
Color : Black
ExternallyAssignedProductIdentifier : 7898556845168
ExternallyAssignedProductIdentifier1 : 793276242099
ExternallyAssignedProductIdentifier2 : 0793276242099
ItemName : Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
ItemPackageDimensions_Height : 28.3 centimeters
ItemPackageDimensions_Length : 8.1 centimeters
ItemPackageDimensions_Width : 18.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-mono-subwoofer-amplifiers
Manufacturer : Alpine
MaximumSupplyVoltage : 6 volts
ModelName : KTA-30MW
ModelNumber : KTA-30MW
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfChannels : 1
NumberOfItems : 1
OperatingTemperature : 40 degrees_fahrenheit
OutputPower : 300 watts
PackageLevel : unit
PackageTypeName : [Assumed] Cardboard Box
PartNumber : KTA-30MW
ProductDescription : Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms

Specifications:
Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
Weather resistant (IP66 rating)
300W x 1 D.P.P. (2Ω, 14.4V, ≤ 1% THD+N)
CTA-2006-B Specifications: 200W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
82dB S/N (ref. 1W into 4Ω)
>0.05% THD
OEM-grade Tyco 26-pin connector with pigtail wire harness
Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)

Sound control:
Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
Input gain settings (variable)
2ch input

The KTA-30MW is perfect for when you want to boost your sound system but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30MW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t. The KTA-30MW can be tucked away under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.

ProductSiteLaunchDate : 2018-04-13T18:03:50.528Z
Size : One Size
SpecificationMet : Ip66
SpecificationMet1 : CE
SpecificationMet2 : FCC
StreetDate : 2021-04-19T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplyCurrent : 33.33 amps
UnitCount : 1
UnspscCode : 52161547
Voltage : 14.4 volts