Cart 2 india

Specification
Brand : KICKER
BulletPoint1 : PACKAGE BUNDLE INCLUDES: Kicker CXA400.1 CX-Series 400-Watt Class D Car Audio Mono Amplifier with Dual Bass Remote, Wiring Install Kit, 12" 1000 Watt Max Thin Down-Firing Subwoofer w/Passive Radiator Enclosure
BulletPoint2 : AMPLIFIER: Kicker 46CXA4001T CX-Series Mono Amps are now one-ohm stable, giving you even more power and wiring options for your system! using efficient Class-D power, the CXA400.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump.
BulletPoint3 : AMPLIFIER: CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! CX.1 amps deliver as much as 400 watts into one bass channel.
BulletPoint4 : REMOTE CONTROL: Dual-Amp Control – Easily manage bass levels for up to two Kicker mono amplifiers or powered subwoofers with a single, sleek knob, ensuring powerful sound at your fingertips.
BulletPoint5 : SUBWOOFER ENCLOSURE: The Kicker TRTP 12-inch Subwoofer Enclosure for the reFLEX Subwoofer and CompRT Sub, pre-wired to a single 2-Ohm terminal. Developed Forced-Air Cooling to help our subs run 20 percent cooler than before. Works best with 500 watts of recommended power.
ExternallyAssignedProductIdentifier1 : 0840440911852
ExternallyAssignedProductIdentifier2 : 840440911852
ItemName : KICKER CXA400.1 CX-Series 400-Watt Class D Car Audio Mono Amplifier with Dual Bass Remote, Wiring Install Kit, 12" 1000 Watt Max Thin Down-Firing Subwoofer w/Passive Radiator Enclosure
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-mono-subwoofer-amplifiers
Manufacturer : Kicker
MaximumSupplyVoltage : 0.2 volts_of_direct_current
MinimumSupplyVoltage : 0.2 volts
ModelNumber : HYBRID-150.4
MountingType : Surface Mount
NumberOfChannels : 4
OperatingTemperature : -40 degrees_celsius
OutputPower : 100 watts
PackageTypeName : box
PartNumber : CXA4001T-DBRC-CK4-TP122
ProductDescription : Amplifier: Efficient Class-D amplifier Variable 12dB crossovers provides control to dial in perfect sound KickEQ 6dB variable bass boost for those additional low frequencies FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Power (watts/ch) 4 Ohm: 150x1 Power (watts/ch) 2 Ohm: 300x1 Power (watts/ch) 1 Ohm: 400x1 Frequency Response (Hz): 25-200, +0/-1dB Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ Boost: Variable 0-6dB @40Hz Dual Bass Remote Control: For use with all KICKER mono amplifiers (or amps with mono channels) and powered subwoofers Controls one or two mono-channel amps that utilize a 3.5mm level controller input Single knob with high-end, metal look Included In Amp Kit: 17 ft 4 awg blue power wire 4 ft 4 awg gray ground wire Self tapping bolt and washer FHS fuse holder with 100 amp fuse L=3.06, W=1.33, H=1.32 17 ft 16 gauge remote wire 16.4 ft KI RCAs 12 ft Q series 12 awg speaker wire 6x 6 zip ties 4 awg firewall grommet 1x 18-22 awg butt connector 4x 12 awg fork terminals 2x blue fork terminal boots 2x black fork terminal boots Amplifier: TYPE: Thin-profile WOOFER SIZE (in, cm):12, 30 IMPEDANCE (Ohms): 2 Amplifier Power (watts RMS): 500 Peak Power (watts): 1000 SENSITIVITY (dB 1w/1m): 98 Tuning Frequency [Hz]: 35
ProductSiteLaunchDate : 2025-03-05T21:24:32.000Z
Size : 12" Subwoofer
SpecificationMet : Amazon's Standards
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 52161500
Voltage : 6 volts_of_direct_current