Cart 2 india

Specification
Brand : Radio Design Labs
BulletPoint : The FP-PA20 features a balanced line level input that may be connected unbalanced
BulletPoint1 : Output Power: 4 Ohm RMS: 140W x 4ch 2 Ohm RMS: 255W x 4ch Max power: 500W
BulletPoint2 : Frequency range: 20Hz-250Khz; Speaker impedance: 2,4,8 Ohm; Filter Frequency: Low pass: 35-250Hz , 12dB Oct. Sub sonic Filter: 10Hz-50Hz Bass booster: 0-12dB 45Hz 4-way protection
BulletPoint3 : High level input connector(Auto turn on)
BulletPoint4 : RCA Input Connectors
BulletPoint5 : Adjustable Low-Pass, Hi-pass. Bass Boost, Sub sonic filter
ExternallyAssignedProductIdentifier1 : 0813721012685
ExternallyAssignedProductIdentifier2 : 813721012685
ExternallyAssignedProductIdentifier3 : 00094922867100
IncludedComponents : 800W Monoblock Ultra Mini Amplifier
ItemName : RDL FP-PA18H 18 W Mono Hi-Temp Audio Amplifier
ItemPackageDimensions_Height : 1.4 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 3.1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-mono-subwoofer-amplifiers
Manufacturer : Radio Design Labs
MaximumSupplyVoltage : 24 volts_of_direct_current
ModelNumber : FP PA18H
MountingType : Surface Mount
NationalStockNumber : 5950-01-601-8610
NumberOfBoxes : 1
NumberOfChannels : 1
NumberOfItems : 1
OutputPower : 20 watts
PartNumber : FP-PA18
ProductDescription : Input:Line level (+4 dBu nominal balanced; -10 dBV nominal unbalanced)Input Impedance:10 kΩ balanced bridging; 5 kΩ unbalancedGain Adjustment:Single turn audio taperMinimum Input Levels:Balanced: -18 dBu (to cross compressor threshold) Unbalanced: -20 dBV (to cross compressor threshold)Maximum Input Levels:Balanced: +23 dBu Unbalanced: +21 dBVFrequency Response:20 Hz to 20 kHz (+/- 1 dB)*THD+N:< 0.5% (20 Hz to 20 kHz)*Compressor:Threshold 3 dB below rated output, automatically adjusting attack and release timesNoise:< -72 dB (below 18 W RMS, +4 dBu input)CMRR: 45 dB (50 Hz to 3 kHz)Output Power:18 W RMS into 8 ΩOutput Circuit:Class DOutput Signal Detector Threshold:30 mW @ 20 Hz; 20 mW @ 30 Hz; 10 mW @ 50 Hz; 5 mW @ 65 Hz through 20 kHzOutput Signal Detector Output:Open collector, 5 mASleep Mode Power Consumption:< 1 W (amplifier and included power supply)Sleep Mode Delay:5, 15 or 25 minutes (selectable)Sleep Mode Disable:SelectableActive Mode Delay:< 150 mS after input audio detectedAudio Detector Threshold:-50 dBu balanced, -52 dBV unbalancedAmbient Operating Environment:0?? C to 50?? C MaximumIndicators (3):Red LED: COMP LED indicates compressor activity Green LED: OUTPUT ACTIVE (controlled by output signal detector) Blue LED: POWER on; Dim: Sleep mode active; Bright: Amplifier active24 Vdc power supply current:16 mA (idle), 975 mA (max.), Ground-referencedPower Supply (included):100 to 240 Vac, 50-60 Hz, 1A max.; 24 Vdc output to moduleDimensions:Height: 1.15 in.(2.92 cm); Width: 3.25 in.(8.26 cm); Length: 3 in.(7.62 cm)
ProductSiteLaunchDate : 2010-08-11T21:47:40.181Z
Style : 6001A
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161547
Voltage : 24 volts_of_direct_current
WarrantyDescription : manufacturer warranty for 90 day