Cart 2 india

Specification
Brand : Zunate
BulletPoint1 : FLEXIBLE AND EXTENDABLE: With 6 section design, the working height can be flexibly adjusted between 44cm and 174cm. Meanwhile, this design is convenient for storage and can be put into backpacks and suitcases for easy traveling.
BulletPoint2 : WIDE COMPATIBILITY: Equipped with 1/4inch and 3/8inch conversion screws, it can be widely compatible with different cell phone clips or DSLR and action cameras. There is a 3/8inch threaded hole at the bottom, convenient to expand the tripod.
BulletPoint3 : FOOT LOCK SYSTEM: Rotate 1/4 turn to complete the leg elasticity adjustment, making it easier and faster to extend or retract. The foot pads, base and foot nails on the bottom can be replaced at will for a variety of photographic scenarios. With a walking stick head, making it a hiking stick in seconds.
BulletPoint4 : WIDELY APPLICABLE: Camera monopod is compatible with tripods and cell phone stabilizers, suitable for all kinds of ball head stabilizers, including for RONIN S, for RONIN SC, for OSMO Mobile 2, for OSMO Mobile 3, for OM 4, for Crane V2.
BulletPoint5 : PREMIUM MATERIAL: The camera monopod is made of premium carbon fiber material, with a thicker 32mm tube diameter and a weight capacity of up to 15kg, more and to use.
Color : Default
CompatibleDevices : Camera
ItemName : Camera Monopod, 6 Section Carbon Fiber Monopod with Walking Stick Head, 1/4in 3/8in Conversion Screw, for DSLR Action Camera
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 54 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : monopods
Manufacturer : Zunate
Material : Aluminum
MaximumHeight : 163 centimeters
MinimumHeight : 48 centimeters
ModelName : Zunate7cxorz4ig3
ModelNumber : Zunate7cxorz4ig3
NumberOfLegSections : 5
PartNumber : Zunate7cxorz4ig3
ProductDescription : 1. FLEXIBLE AND EXTENDABLE: With 6 section design, the working height can be flexibly adjusted between 44cm and 174cm. Meanwhile, this design is convenient for storage and can be put into backpacks and suitcases for easy traveling.
2. WIDE COMPATIBILITY: Equipped with 1/4inch and 3/8inch conversion screws, it can be widely compatible with different cell phone clips or DSLR and action cameras. There is a 3/8inch threaded hole at the bottom, convenient to expand the tripod.
3. FOOT LOCK SYSTEM: Rotate 1/4 turn to complete the leg elasticity adjustment, making it easier and faster to extend or retract. The foot pads, base and foot nails on the bottom can be replaced at will for a variety of photographic scenarios. With a walking stick head, making it a hiking stick in seconds.
4. WIDELY APPLICABLE: Camera monopod is compatible with tripods and cell phone stabilizers, suitable for all kinds of ball head stabilizers, including for RONIN S, for RONIN SC, for OSMO Mobile 2, for OSMO Mobile 3, for OM 4, for Crane V2.
5. PREMIUM MATERIAL: The camera monopod is made of premium carbon fiber material, with a thicker 32mm tube diameter and a weight capacity of up to 15kg, more and to use.

Specification:
Item Type: Camera Monopod
Material: Carbon Fiber
Pipe Section: 6 Sections
Maximum Tube Diameter: 32mm / 1.3in
Minimum Tube Diameter: 16mm / 0.6in
Storage Height: 44cm / 17.3in
Unfolded Height: 174cm / 68.5in
Load Bearing: Approx. 15kg / 33.1lb

packing list:
1 xCamera Monopod
1 x Storage Bag
1 x Foot Nail
1 x Wrench
1 x Instruction Manual
1 x Phone Clip
1 x Walking Stick Head


ProductSiteLaunchDate : 2024-07-01T13:00:13.440Z
TripodHeadType : Ball Heads
UnspscCode : 45121600