Cart 2 india

Specification
AgeRangeDescription : adult
Brand : YFUSET
BulletPoint : MOSFET
BulletPoint1 : The module can easily connect the motor interface with the controller board to make the motor drives have become simpler, and common application scenarios include robots, smart cars, and aircraft.
BulletPoint2 : The module can be connected to 2 servos and directly output PWM drive
BulletPoint3 : The module can be connected to 4 DC brushed motors or 2 4-wire stepper motors
BulletPoint4 : The module uses a TB6612FNG motor driver chip with a drive capacity of 1.2A and a peak of 3.2A
BulletPoint5 : The module has 4 motor control modes: forward rotation/reverse rotation/braking/stopping
BulletPoint6 : packaging contains 10 components, carefully sealed in an anti-static bag to provide electrostatic bag protection, safety, and extended shelf life.
Color : One Color
ExternallyAssignedProductIdentifier : 7660046037182
ExternallyAssignedProductIdentifier1 : 0768383220629
ExternallyAssignedProductIdentifier2 : 768383220629
IncludedComponents : Transistors
ItemName : 2pcs TB6612 MOSFET DC Stepper Motor and Servo Driver Module TB6612FNG Replaces L293D for Arduino Mega Robotics
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 0.2 inches
ItemPackageDimensions_Width : 0.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : mosfet-transistors
Manufacturer : YFUSET
Material : silicon
ModelName : IPDBLBYL
ModelNumber : IPDBLBYL
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ZGW-57
ProductDescription :

Name: TB6612 DC stepper motor servo drive module

Size: 68mm*53mm*20mm/2.68in*2.09in*0.79in

Weight: 26g/0.92oz

Power supply voltage: 8-35V

Logic voltage: 5~12V

Reference voltage: 5.5V

Output on-resistance: 320-430M ohms per driver

Diode forward voltage: 1.2V per driver

Output current of the driver: ±2A

Application: Motor/Stepper/Servo Shield v2

Product Introduction:

Fully compatible with the extension of the Arduino interface.

Arduino communication can be modified via 12C and address.

The module can be connected to two motors, PWM drive direct output, up to four DC brush motors or two four-wire stepper motors.

Uses TB6612FNG motor driver chip, 1.2A drive capability, peak 3.2A.

It also has a lower motor voltage drop, so you can get more torque from the battery.

Instead of using latches and Arduinos PWM pins, the module has a comprehensive dedicated PWM driver on the chip

Actuator, the chip handles all the motors and speed control on the I2C, and only two pins are needed to drive multiple motors(SDA and SCL), stackable design.

ProductSiteLaunchDate : 2024-09-18T14:42:56.960Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500