Cart 2 india

Specification
Brand : shenruifa
BulletPoint1 : Made of high quality plastic shell, eco‑friendly, and sturdy to use
BulletPoint2 : Create a reliable and invisible infrared beam up to 20 meters
BulletPoint3 : Infra‑red frequency: 1.92Khz; Power supply: DC 12V; length: 940nm
BulletPoint4 : Half egg shaped, input: >50mA, operating temperature: ‑10℃ to 70℃
BulletPoint5 : Range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc
Color : Blue
ExternallyAssignedProductIdentifier : 4713127269101
IncludedComponents : inc
ItemName : 1pair 20m Simple Beam Alarm Photoelectric Infrared Sensor Detector Home Door Security System
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motion-detectors
ItemTypeName : Motion Detectors
Manufacturer : shenruifa
Material : Material
MaximumRange : 12 meters
ModelName : shenruifakhx2iczq5p
ModelNumber : shenruifakhx2iczq5p
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : shenruifakhx2iczq5p
PowerSourceType : Powersource
ProductDescription :
Description:
This pair of infrared detector need install them at the opposite positions. There is a infrared area between these two detector parts. When someone passes the infrared region for an adjusted response time, the detector will send alarm , great for security system in school, office building, hospital, parking and home yard, etc.

Specification:
Color: Black
Shell Material: Plastic
Receiver Range : Less than 20m
Infra-red Frequency: 1.92KHZ
Wavelength: 940nm
Voltage: DC 12V
Input: RX 15mA-TX 30mA
Operating Temperature: -10? to 70?
Relay Output: 1A maximum 30V, constant open/close, can be set by jumper wire
Size (L x W x T): Approx. 76 X 49.2 X 21.6mm / 3 x 1.9 x 0.9inch
Package Weight: Approx. 130g
Package Included:
1 x Transmitter
1 x Receiver
1 x Set of Accessories
1 x User Manual
Note:
1. The best installation height should be more than 20 cm, distance is not less than 2 meters.
2. Infrared device should be installed vertically, and at the same level.
3. First installing receiver, then installing transmitter. When the off light of receiver is turning off, then fixed it, installation finished.
4. Distance between receiver and transmitter need be more than 1m, otherwise it will be insensitive .
5. Please note that the new type and old type of this product will be sent randomly and make sure you will not mind before ordering.


ProductSiteLaunchDate : 2024-03-27T08:21:29.576Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 1 volts