Cart 2 india

Specification
Brand : ALAMSCN
BulletPoint : GY-PCM2706 Gesture Recognition Sensor Module USB to I2S IIS Gesture Detection Motion Module Board For Arduino
BulletPoint1 : Note:It is recommended to read the VL53L0X datasheet before using this product
BulletPoint2 : VL53L0X:A time-of-flight ranging system integrated into a compact module
BulletPoint3 : Function:VL53L0 is a small self-contained liDAR system,which uses ST's FlightSense technology to measure the time it takes for emitted infrared laser pulses to reach the nearest object and reflect back to the detector
BulletPoint4 : Working Voltage: 2.8V-5V;Communication method: IIC communication protocol (compatible with 3-5V system)
BulletPoint5 : Package Includes:2 x VL53L0X Time-of-Flight Ranging Sensors
Color : As Shown,white
ExternallyAssignedProductIdentifier : 8017265393589
ExternallyAssignedProductIdentifier1 : 0687117748980
ExternallyAssignedProductIdentifier2 : 687117748980
IncludedComponents : Sensor
ItemName : 2pcs VL53L0X Time-of-Flight Ranging Sensor Flight Distance Measurement Sensor Module VL53L0X ToF Sensor for Arduino(Black)
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motion-detectors
Manufacturer : ALAMSCN
Material : Plastic
MaximumRange : 500 feet
ModelName : GY530
ModelNumber : AL12826
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : A58638MCEMTL1517DQFC
PowerSourceType : Battery Powered
ProductDescription :

Ranging measurement is available through the sensor's I⊃2;C (TWI) interface,which can also be used to configure sensor settings.

The sensor provides 2 additional pins: a shutdown input and an interrupt output.

Application: Suitable for user detection PC,laptop, robots,drones obstacle detection.

PIN Description:

VDD Regulated 2.8 V output.    Almost 150 mA is available to power external components.     (If you want to bypass the internal regulator,use this pin as a 2.8 V input with VIN disconnected.)

VIN:power supply connection.    (The SCL and SDA level shifters pull the I2C lines high to this level.)

GND: Ground (0 V) connection for your power supply.      ( Your I2C control source should also share a common ground with this board)

SDA Level-shifted I²C data line: HIGH is VIN, Low is 0 V

SCL Level-shifted I²C clock line: HIGH is VIN, Low is 0 V

XSHUT:An active-low shutdown input.

By default,the board pulls it up to VDD to enable the sensor.

Driving this pin low puts the sensor into hardware standby.

This input is not level-shifted.

Package:

2x VL53L0X Time-of-Flight Ranging Sensor

ProductSiteLaunchDate : 2024-09-10T07:02:42.193Z
Size : One Size
StreetDate : 2024-01-01T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41111900