Specification BatteriesRequired : 1 Brand : HSYHous BulletPoint1 : 【LONG-DISTANCE WIRELESS TRANSMISSION】 This motion detection alarm system features a wireless signal range of up to 230 feet between the motion sensor and the receiver. The sensor itself can detect movement within 20-foot. It’s an ideal solution for medium-sized homes, offering reliable coverage without being overly complex. BulletPoint2 : 【WIDE-RANGE PROTECTION】 This driveway alarm sensor is designed to detect people, vehicles, or animals entering the monitored area. When triggered, it sends a signal to the receiver, which then sounds an alarm and flashes an indicator light. This alerts the homeowner to the presence of an intruder or visitor, helping to monitor and safeguard your property. It’s versatile and can be used in various locations, such as driveways, front doors, garages, shop entrances, backyards, or mailboxes. BulletPoint3 : 【38 RINGTONES & MUTE MODE】 The home alarm doorbell’s receiver offers 38 ringtones and three volume settings—high, medium, and low. If you need silence, simply switch to mute mode, and the system will operate quietly with only the indicator light flashing to signal activity. BulletPoint4 : 【EASY INSTALLATION】This motion sensor doorbell comes pre-paired for your convenience. Simply power the motion sensor with 3 AAA batteries (not included), mount the sensor with bracket in your desired location, and plug the receiver into an outlet. Once set up, the system is ready to use right away. BulletPoint5 : 【IMPORTANT NOTE】 This product is not weatherproof, so please keep it protected from rain and snow. To reduce false alarms, adjust the sensor’s angle to avoid detecting small animals, such as birds, on your front lawn. This ensures optimal performance and reliability. Color : White CompatibleDevices1 : Driveways CompatibleDevices2 : Front Door CompatibleDevices3 : Garage CompatibleDevices4 : Store Entrance CompatibleDevices5 : Mailbox ExternallyAssignedProductIdentifier1 : 755320358392 ExternallyAssignedProductIdentifier2 : 0755320358392 Frequency : 433 hertz IncludedComponents1 : 1 Receiver IncludedComponents2 : 2 Detectors IncludedComponents3 : 2 Wall Mounting Accessories IncludedComponents4 : 1 Manual IncludedComponents5 : PC Bags ItemName : Driveway Alarm-Wireless Motion Sensor Alarm & Detector, Long Range Home Security Driveway Alert System to Monitor and Safeguard Home Property (1 Receiver and 2 SENSORS) ItemPackageDimensions_Height : 13.9954 centimeters ItemPackageDimensions_Length : 8.89 centimeters ItemPackageDimensions_Width : 8.9916 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : motion-detectors LowerTemperatureRating : -10 degrees_celsius Manufacturer : HSYhous Material : default MaximumRange : 230 feet ModelName : 0256 ModelNumber : 0256 MountingType : Wall Mount NumberOfItems : 1 OperatingTemperature : 25 degrees_celsius PartNumber : Topyond9dkf78w32t PowerSourceType : Battery Powered ProductDescription : Driveway Security Sensor Doorbell
How to Use the Device
1.Insert the correct batteries (not included) into the detector.
2.Ensure the batteries are properly positioned.
3.Mount the detector in a suitable location, such as near the front door, window frame, driveway, walkway, backyard, or any other area where monitoring is needed.
4.Turn on the receiver and adjust the volume settings (high, medium, or low).
5.The remote detection system is now operational, utilizing infrared detection technology.
6.Place the receiver in an easily accessible location.
7.When the detector senses motion, the receiver will emit an audible alert, and the LED light will flash.
8.Allow 30 seconds after powering on the detector and receiver for the system to activate.
9.For optimal performance, install both units at least 3 feet above the ground.
Helpful Tips
● Avoid placing the detector in windy areas to prevent movement.
● Ensure there is a clear line of sight between the detector and the receiver for the best performance.
Care and Maintenance
1.Important: Keep the detector and receiver in sheltered areas to protect them from water and direct sunlight.
2.If the LED indicator does not light up, the batteries may be low or dead. Replace them as needed.
3.Regularly clean the detector with a damp cloth to prevent dirt or debris from blocking the sensor.
4.Avoid placing the device in areas where it may get wet. During heavy storms or snowfall, move the unit indoors or to a safe location.
5.Do not attempt to disassemble the units.
6.When not in use, remove all batteries, clean both units, and store them in a dry, cool place.
7.This device is not a toy and should be kept out of reach of children.
Specifications
● Receiver operating voltage: 110V-240V
● PIR sensor operating voltage: 4.5V (3 AAA batteries)
● Receiver settings:
a. Music source: 36 different songs available; use the external “music” button to select.
b. Volume adjustment: Three levels (high, medium, low).