Cart 2 india

Specification
AlertType : Motion
AssemblyInstructions : DIY
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : GKOXUQ
BulletPoint1 : simple convenience and with our Night Motions Sensoring Light Switches, designs to automatically illuminates your space by detecting human movement using advanced Night technology.
BulletPoint10 : An audible beep will sound with every key pressed.
BulletPoint11 : Keypad will operate up to 3 doors with one PIN number.
BulletPoint12 : A temporary PIN can be set for convenient non user access.
BulletPoint13 : Do not press the LEARN button for longer than the noted 2-3 seconds as it could cause the operational remotes to no longer work.
BulletPoint14 : Locate the brand and opener/receiver specifications for the device by consulting the label on the opener/receiver, the instructions manual, the current remote controls for the opener, or the original manufacturer or the opener/receiver.
BulletPoint15 : Find the LEARN/PROGRAM button on the device - shape, color or name of this button could vary by brand. For garage door openers, be sure to check under the light covers. For commercial openers, this button may be on the circuit board or the opener. In some cases, this button could also be on an external receiver that is mounted on or nearby the product. Consult the devices manual if needed.
BulletPoint16 : Remove activation tab from inside battery compartment.
BulletPoint17 : Press both the PROGRAM & UP/DOWN keys at the same time and hold for 5 seconds. (tone will sound) - then release (green LED will flash and go out).
BulletPoint18 : The keypad is now ready to be programmed. Start at STEP 3.
BulletPoint19 : On the keypad, enter a personal PIN (3-8 digits)
BulletPoint2 : Suitable for users of all ages, this user friendly device offer operate , making it accessible and easy to use for everyone in the household or workplace.
BulletPoint20 : On the keypad, press and release the UP/DOWN key (LED flashes slowly).
BulletPoint21 : On the keypad, enter the ID# of the opener from Chart A.
BulletPoint22 : On the keypad, press and release the UP/DOWN key (LED flashes rapidly).
BulletPoint23 : On the opener, press the LEARN/PROGRAM button for 2-3 seconds and then release.
BulletPoint24 : On the keypad, press the UP/DOWN key once every two seconds until the opener operates. DO NOT press any additional buttons until the opener stops running
BulletPoint25 : WAIT until backlighting is out before attempting additional keypad entries. Programming is complete
BulletPoint26 : On keypad, enter personal PIN (3-8 digits).
BulletPoint27 : On keypad, press and release UP/DOWN key (LED flashes slowly).
BulletPoint28 : On keypad, enter the ID#: 4
BulletPoint29 : On keypad, press and release UP/DOWN key (LED flashes rapidly).
BulletPoint3 : build with PC Component , this Sensoring Switches boasts overloading Protections and construction, ensuring Stable Performances and longevities in any setting.
BulletPoint30 : Then press and hold down UP/DOWN key.
BulletPoint31 : Release button after tone sounds (5 sec).
BulletPoint32 : On opener, press LEARN/PROGRAM button 2-3 seconds and then release.
BulletPoint33 : On keypad, press UP/DOWN key ONE time. Opener will click.
BulletPoint34 : On opener, press LEARN/PROGRAM button 2-3 seconds again and then release.
BulletPoint35 : On keypad, press UP/DOWN key again ONE time. Opener will click.
BulletPoint36 : On keypad, press UP/DOWN key again ONE time. Opener will operate.
BulletPoint37 : WAIT until backlighting is out before attempting additional keypad entries. Programming is complete.
BulletPoint38 : . With keypad backlighting off, press the PROGRAM button 2 times to program a second opener OR press it 3 times to program a third opener (blue LED flashes slowly).
BulletPoint39 : . With blue LED still flashing, return to #3 in the section above and enter its opener ID# from CHART A.
BulletPoint4 : for various environment, from homes and offices to retail stores, its Modulars designs ensures quick installation and adaptability across various lighting setups.
BulletPoint40 : Continue with the remaining numbered steps.
BulletPoint41 : Ensure number pad back lighting is of
BulletPoint42 : Enter PIN
BulletPoint43 : Press the UP/DOWN key.
BulletPoint44 : Opener will operate.
BulletPoint45 : Enter PIN.
BulletPoint46 : . Press the UP/DOWN key
BulletPoint47 : Press number key corresponding with desired door (1, 2, or 3).
BulletPoint48 : Desired opener will operate
BulletPoint49 : Enter main PIN.
BulletPoint5 : This Multifunction module features Double activation Motions detection and voice control, operating efficiently on a low power consumption of just 85mA, for 110V to 240V power sources.
BulletPoint50 : Press PRGM key three times (LED will turn solid indicating keypad is ready for temporary PIN).
BulletPoint51 : Enter temporary PIN (3-8 digits)
BulletPoint52 : Press PGRM key one time (LED will blink twice and go out indicating a temporary PIN is set).
BulletPoint53 : To cancel the temporary PIN, operate the keypad/door with the original main PIN.
BulletPoint54 : Enter current main PIN.
BulletPoint55 : . Press PRGM key one time (LED will turn solid indicating keypad is ready for new PIN).
BulletPoint56 : Enter new PIN (3-8 digits).
BulletPoint57 : . Press PGRM key one time (LED will blink twice and go out indicating a new PIN is set).
BulletPoint58 : Remove battery cover and batteries. Replace if necessary. NOTE: Only use standard or alkaline AAA batteries. DO NOT use rechargeable batteries.
BulletPoint59 : Drill a 3/32” pilot hole for the top mounting screw
BulletPoint6 : Ability to set a temporary PIN for neighbors or service workers that can easily be removed.
BulletPoint60 : Install included screw into pilot hole, leaving 1/8” gap between the screw head and wall.
BulletPoint61 : Hook the slotted mount on back of keypad over the screw.
BulletPoint62 : Mark and drill a 3/32” pilot hole for the bottom screw and secure keypad to the wall. (Do not over-tighten).
BulletPoint63 : . Reinstall batteries.
BulletPoint7 : Simple and sleek cover design.
BulletPoint8 : Dimensions = 6"L x 2-3/8"W x 1-5/16"H
BulletPoint9 : Includes Universal Keypad, 2 x AAA batteries, mounting screws, and programming instructions.
ButtonQuantity : 3
Color : Voice control 85MA
CompatibleDevices : Garage Door Opener, Garage Door Receiver
ConnectivityTechnology : Radio Frequency
ConnectorType : [PO] USB
ControllerType : Button Control
ControlMethod1 : application
ControlMethod2 : voice
ExternallyAssignedProductIdentifier : 7707230106566
ExternallyAssignedProductIdentifier1 : 0050049022440
ExternallyAssignedProductIdentifier2 : 00050049022440
ExternallyAssignedProductIdentifier3 : 050049022440
Hazmat1 : auto-grounding
Hazmat10 : ES_NoAir
Hazmat11 : IN_NoAir
Hazmat12 : MX_NoAir
Hazmat13 : CN_NoAir
Hazmat14 : BR_NoAir
Hazmat15 : SG_NoAir
Hazmat16 : AU_NoAir
Hazmat17 : TR_NoAir
Hazmat18 : AE_NoAir
Hazmat19 : SA_NoAir
Hazmat2 : 3
Hazmat20 : NL_NoAir
Hazmat21 : EG_NoAir
Hazmat22 : SE_NoAir
Hazmat23 : PL_NoAir
Hazmat24 : BE_NoAir
Hazmat25 : ZA_NoAir
Hazmat26 : IE_NoAir
Hazmat27 : ZA_SmallLithiumMetalBatteryInEquipment
Hazmat28 : 9
Hazmat3 : US_NoAir
Hazmat4 : GB_NoAir
Hazmat5 : DE_NoAir
Hazmat6 : FR_NoAir
Hazmat7 : JP_NoAir
Hazmat8 : CA_NoAir
Hazmat9 : IT_NoAir
IncludedComponents : Remote control
InstallationType : Self-Adhesive
ItemName : Energy Efficient Motions Sensoring Light Switches 110V/240V High Sensitivity with Overloading Protections &
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : motion-detectors
Manufacturer : GKOXUQ
Material : Plastic
ModelName : CHAF821
ModelNumber : 41249R
NoiseLevel : 90 decibels
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumIonCells : 1
PartNumber : GKOXUQ
PowerSourceType : Corded Electric
ProductDescription : Energy Efficient Motions Sensoring Light Switches 110V/240V High Sensitivity With Overloading Protections &



,

,

:
ProductSiteLaunchDate : 2025-04-09T22:32:34.000Z
RecommendedUsesForProduct : Indoor
RecommendedUsesForProduct1 : Home Security
RecommendedUsesForProduct2 : Baby Monitor
Style : Type 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 3
UnitCount : 1
UnspscCode : 46170000
Voltage : 5 volts