Cart 2 india

Specification
AgeRangeDescription : Erwachsener
Alarm1 : Visual
Alarm2 : Audible
Amperage : 1.8 amps
BatteriesIncluded : 1
Brand : JMT
BulletPoint1 : Based on X-band ra·dar chip design low-power micro/motion sensing module, center frequency 10.525GHZ, the design adopts fixed-frequency, directional transmitting and receiving antenna (1T1R), integrates the functions of IF demodulation, signal amplification and digital processing, etc., and has the ability to set the delay time, which is convenient for self-adjustment of the parameters.
BulletPoint2 : Operating frequency:10.525GHz(10.40~10.65GHz). Operating voltage:3.3~12.0V. Operating current:16mA(Max,VCC=3.3-12.0V). Detection Angle:Ceiling Mount/3dB Beamwidth/110°±10°. Operating environment:Temperature -20℃C~+70℃/Humidity 10~95%Rh.
BulletPoint3 : Sensing Distance:2~8 meters(Hanging height 3 meters). Output Voltage:3.3V(3.2~3.4V). Power-on stabilization time:15S(13~17S). Blocking/Delay Time:2S/5S(Typ.). ESD Characteristics: Contact Discharge/Air Discharge 2KV(Typ.)
BulletPoint4 : Resistor R14 is the resistor to adjust the sensing threshold, the default value is the third gear. R14: the larger the resistance value, the closer the sensing distance; (default 14=93.1K). R16 is the resistor to adjust the delay time, the default is the first gear. R16: the larger the resistance value, the longer the delay time. (Default R16=20K)
BulletPoint5 : Interface Type: (Hole spacing 2.0/2.54mmx3PIN). O:IO detection output G:GND, power ground V:5V(3.3~12V). Max power consumption is 15mA for normal power supply and 110uA for pulse power supply (R17 is not welded for pulse power supply and 2k is welded for normal power supply).
BulletPoint6 : Delay time is the time to keep the state after triggering, the default value is 5s, which can be set according to the demand. Blocking time is the time when the output state is flipped and triggered again without response, the default value is 2s.
BulletPoint7 : When several devices with built-in ra·dar modules are fixedly installed, the distance between each device should be ensured to be >0.5m. The ra·dar module antenna surface is recommended to be 3~5mm away from the product shell, otherwise it will affect the sensing distance.
Color : Module without Pin
Color1 : Red
Color2 : Black
CompatibleDevices : Cameras
CompatibleDevices1 : Smartphone
CompatibleDevices2 : Tablet
CompatibleDevices3 : Laptop
CompatiblePhoneModels : Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5s
CompatibleWithVehicleType : Automobile
ConnectivityTechnology : Wired
ConnectorType : Barrel Connector
ControlMethod : application
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 4894927061611
ExternallyAssignedProductIdentifier1 : 8012199755847
ExternallyAssignedProductIdentifier2 : 8012199663708
ExternallyAssignedProductIdentifier3 : 08012199755847
FormFactor : Coiled Cable with a Magnetic Connector and a Quick Charge Adapter
GpsrSafetyAttestation : 1
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat11 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat12 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat13 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat14 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat15 : IE_SmallLithiumIonBatteryWithEquipment
Hazmat16 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat17 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat18 : JP_SmallLithiumIonBatteryWithEquipment
Hazmat19 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat21 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat22 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat23 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat24 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat25 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat26 : US_SmallLithiumIonBatteryWithEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat5 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat6 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat7 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat8 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat9 : CN_SmallLithiumIonBatteryWithEquipment
IncludedComponents : 1
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 4 inches
ItemDisplayDimensions_Width : 4 inches
ItemDisplayWeight : 0.04 kilograms
ItemName : JMT HLK-LD1020 10g Micro Motion Intelligent Module Low Power Ra·DAR Sensor (Module Without Pin)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : motion-detectors
Language1 : italian
Language2 : german
Language3 : french
Language4 : english
Language5 : spanish
Language6 : italian
LowerTemperatureRating : -4 degrees_fahrenheit
Manufacturer : JMT
Material : Plastic
MaximumRange : 30 meters
ModelName : AM5001
ModelNumber : HP247
MountingType : Wall Mount
NoiseLevel : 100 decibels
NumberOfItems : 1
NumberOfLithiumIonCells : 1
NumberOfLithiumMetalCells : 1
NumberOfPowerLevels : 1
OperatingHumidity : 93 percent
OperatingTemperature : 104 degrees_fahrenheit
OutputCurrent : 1.8 amps
OutputVoltage : 5 volts
PackageLevel : unit
PartNumber : F53587
PowerPlugType : type_a_2pin_na
PowerSourceType : Battery Powered
ProductDescription : Driver power supply design considerations
Be sure to use the output voltage, current and ripple coefficient of the drive power up to standard, drive power is not stable, electromagnetic radiation is too strong, will cause the ra·dar module false alarms, no perception, cycle of self-starting and other phenomena.

Matching drive power supply should be in 3.3~12V, drive current is not less than 1mA (or 100mA), power supply ripple amplitude should be controlled within 100m V, frequency fluctuation amplitude should be small.

Drive power and ra·dar module assembly, should avoid ra·dar module bottom or antenna surface, facing the drive power module, and should try to stay away from the drive power module inside the rectifier bridge, switching transformer and other industrial frequency interference devices.

Precautions
The device assembled with ra·dar module should be installed far away from ventilation ducts, fire pipes, drainage pipes, mechanical vibration or large metal equipment and other strong vibration objects, because it will affect the ra·dar reflected waves and detection and perception effects.

It is strictly prohibited to work with electricity, so as to avoid action errors, connecting the wrong, burned circuit or electric shock; avoid installation in the sun and rain to prevent damage and affect the service life.

The device must be installed far away from the electromagnetic field place, so as to avoid electromagnetic interference to produce false action; should also be installed far away from the object fixed rotation or swing (such as electric fans, swinging leaves, wind drying clothes, etc.) place, so as to avoid false action.

When several devices with built-in ra·dar modules are fixedly installed, the distance between each device should be ensured to be >0.5m.
ProductSiteLaunchDate : 2024-11-26T07:28:45.614Z
RecommendedUsesForProduct : Door Sensor, Window Sensor, Advanced sensor
RecommendedUsesForProduct1 : Walkway
RecommendedUsesForProduct2 : Terrace
RecommendedUsesForProduct3 : Garden
RecommendedUsesForProduct4 : Sidewalk
RecommendedUsesForProduct5 : Lawn
RecommendedUsesForProduct6 : Driveway
RecommendedUsesForProduct7 : Garage
ShipsGlobally : 1
Size : 1 adet
StreetDate : 2016-10-02T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
TemperatureRange : 1E+2 degrees_fahrenheit
UnitCount : 20
UnspscCode : 46171600
UpperTemperatureRating : 104 degrees_fahrenheit
Voltage : 250 volts
WaterResistanceLevel : not_water_resistant
Wattage : 4000 watts