Cart 2 india

Specification
Brand : RIZGHWOY
BulletPoint1 : [Good sensitivity detector]: The product has a highly sensitive detector and an integrated circuit for movement detection.
BulletPoint2 : [Continuous time delay]: The time delay function guarantees a lighting experience for more comfort.
BulletPoint3 : [CE certification]: acquired CE certification for tranquility. Ideal for hidden assembly on inner roof.
BulletPoint4 : [Energy saving automation]: It gathers automatism for safe, practical and low energy consumption functionality.
BulletPoint5 : [Day and night identification]: Automatically identifies the day and night to guarantee optimal lighting control.
IncludedComponents : No
ItemName : Light Switch with 360 ° Adjustable Roof Movement Sensor for Indoor Assembly
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : motion-detectors
Manufacturer : RIZGHWOY
ModelName : Rizghwoyo184snq9br
ModelNumber : RIZGHWOYo184snq9br
NumberOfItems : 1
PartNumber : RIZGHWOYo184snq9br
ProductDescription :

Features:
1.The product adopts a good sensitivity detector, integrated circuit.
2. identifies the day and night automatically.
3. The time delay is added continuously.
4. Reun automatism, convenient security, energy saving and practical function.
5. Ce certification is acquired.
Specifications:
2 . Food frequency: 50 Hz/60 Hz
3. Environmental light: 3-2000Lux (adjustable)
4. Time delay adjustment: minimum 10+-3 seconds; Maximum 7+-2min.
5. Nominal load: 800 W maximum tungsten; Maximum fluorescent of 300 w
6. Detection range: 360 °
7. Working temperature: -10 ~+40 ℃
8. Work humidity: 9. Installation height: 2.5 m ~ 3.5 m
10. Energy consumption: 0.45 W (work); 0.1 W (static)
12. Movement detection speed: 0.6 ~ 1.5 m/s
13. Size (d * h): approx. 7.6 * 6.5 cm / 3 * 2.6 inches
14. Approximate weight. 72g
Installation:
1. Turn off the food.
2. Removing the transparent cover found in the lower part of the sensor.
3. Loosening the screws in the connection terminal, connecting the power and nominal load to the sensor connection terminal according to the connection sketch.
4. Tighten the screws; Place the transparent cover at the original station.
5. Double the metal spring of the sensor up, until it is in position I with the sensor, then place the sensor in the orifice or installation boa that is on the ceiling, the size is similar to that of the article. When you release the spring, the sensor will be placed in this installation position. It must be installed by an electrician or an expert.
2. Avoid installing it on disturbing objects.
3. Allow a 1-2 cm error due to manual measurement. Thanks for your understanding.
4.
ProductSiteLaunchDate : 2024-12-21T19:46:42.449Z
UnspscCode : 46171600