Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Respicefinem
BulletPoint1 : Wide range of applications recommended for distances from 5mm to 100mm, this sensor module is for use in robots and interactive projects, offering versatility and ease of integration
BulletPoint2 : Accurate Distance Measurement: Utilizing Time Of Technology, The Vl6180X Sensor Accurately Measures The Distance By Calculating The Time It Takes For The To The. Wide Application
BulletPoint3 : High Ranging: The Vl6180X Time Of Sensor Offers Fast And Accurate Distance Ranging Capabilities, Making It For Applications That Require Measurements. With Its Ability To Measure Distances From 5Mm To 100Mm, This Sensor Reliable And Consistent Results
BulletPoint4 : Vl6180X Is Time Of Ranging Sensor. The Sensor Contains Very Smallsource And Matching Sensor. Vl6180X Detect The Time Of Or The Time Required For Theto Recover The Sensor To Calculate The Distance
BulletPoint5 : Easy Device Control Utilizing An I2C Interface, This Sensor Module Provides Convenient Device Control And Data. It Also Features Two Programmable Gpio Pins, Offering Flexibility In Various Projects
Color : One Color
ExternallyAssignedProductIdentifier : 9109325091913
IncludedComponents : No
ItemName : Respicefinem Distance Measuring Tool Narrow Light Source 9. 0×6. 0×1. 0 Vl6180X Range Finder Optical Ranging Sensor Module Recognition for Vl6180X Accurate Clock Measurement
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motion-detectors
Manufacturer : Respicefinem
ModelName : Respicefinemze7nva6u4c
ModelNumber : Respicefinemze7nva6u4c
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Respicefinemze7nva6u4c
ProductDescription : Pin Definition:
Power supply pin:
GND - Power supply ground;

I2C communication pin:
SCL - I2C clock pin, connected to the master SCL;
SDA - I2C data pin, connected to the master SDA;

Control pin:
GPIO - Pin that the sensor uses to indicate the data ready. Note that the pin output is 0-2.8V high and low level. This pin may not be applied to boards such as for (These boards are 3.3 or 5V high level), need to add level conversion if applied.
SHDN - Shutdown pin of the sensor. By default it is pulled high. There is a level conversion diode so you can use 3-5V logic on this pin. When the pin is pulled low, the sensor enters shutdown mode.

Package List：
1 x Sensor

ProductSiteLaunchDate : 2024-08-30T06:59:35.382Z
Size : One Size
UnitCount : 1
UnspscCode : 46170000