Cart 2 india

Specification
Brand : Eujgoov
BulletPoint : Leadshine DMA860H step driver DSP microstep driver AC18~80V DC24-80V 2 phase for 60 86 110 Stepper Motor Nema23 Nema34 Nema42
BulletPoint1 : Working Principle: The PLC Relay Board isolates and amplifies the weak control (only a few milliamps of current) by photoelectricity, and finally output a higher power control to directly drive the motor, contactor, solenoid valve, etc.
BulletPoint2 : The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs.
BulletPoint3 : Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively the output node of the PLC.
BulletPoint4 : The PLC Relay Board is made of electronic components, stable and performance.
BulletPoint5 : Hole punching and PCB module mounting are more convenient.
Color : Black
ExternallyAssignedProductIdentifier1 : 0762668897025
ExternallyAssignedProductIdentifier2 : 762668897025
ExternallyAssignedProductIdentifier3 : 5693671230705
GpsrSafetyAttestation : 1
ItemName : 16 Channel PLC Isolation Board, PLC Amplifier Board 12-36V DC Amplifier Circuit Board Driver Module
ItemPackageDimensions_Height : 17.9 centimeters
ItemPackageDimensions_Length : 4.4 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : Eujgoov
Material : copper
ModelName : Eujgoovpnkxr5ya6g
ModelNumber : Eujgoovpnkxr5ya6g
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Eujgoovpnkxr5ya6g
ProductDescription : 1. Isolate and amplify the weak control (only a few milliamps of current) by photoelectricity, and finally output a higher power control to directly drive the motor, contactor, solenoid valve, etc.
2. The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs.
3. Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively the output node of the PLC.
4. Made of electronic components, stable and performance.
5. Hole punching and PCB module mounting are more convenient.

Specification:
Item Type: 16 Channel PLC Amplifier Board
Input Voltage: DC12-36v active low
Output Voltage: 12-36V DC
Output Current: Less than 5A (long time) 50A FET
Installation Method: Drilling, PCB module rack

Package List:
1 x 16 Channel PLC Amplifier Board

ProductSiteLaunchDate : 2023-12-23T00:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31160000
Voltage : 220 volts
Wattage : 2.2 kilowatts