Cart 2 india

Specification
Brand : DMBGRXJF
BulletPoint : Alternators
BulletPoint1 : Alternators
BulletPoint2 : 【See the second picture of the variant for detailed parameters】
BulletPoint3 : 【See the second picture of the variant for detailed parameters】
Color : With DM860H Driver
ExternallyAssignedProductIdentifier : 7375605790353
ItemName : CNC Stepper Motor 86X156mm 12.5N.m 5.5A Diameter 14mm 1700Oz-in +dm860h / Dma860h 1Pcs(With DM860H Driver,Single Shaft)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : DMBGRXJF
ModelName : DMBGRXJF
ModelNumber : DMBGRXJF
NumberOfItems : 1
PartNumber : DMBGRXJF
ProductDescription : Alternators
1pcs & 86x156mmStepper Motor 55A 125Nm 1 pcs driver
General Specification
Phase:2
Step Angle:1.8 deg
Current:5.5A
Holding Torque:12.5 Nm
Shaft Diameter:14mm (Key shaft 5mm)
Black(A+), Green(A-), Red(B+), Blue(B-)Warning:Make sure the motor connect to a constant current or chopper drive controller before you test motor.Connecting the motor directly to a power supply will the motor.
Current / Phase : 5.5A
Holding Torque : 125Kg.cm
Step Angle(degrees) : 1.8 degree
Phase : 2
Model Number : 86HS15660A4
Type : HYBRID
Phase Inductance : 6.0mH
Detent Torque : 3600 g.cm Max
Motor Length: : 156 mm
Rotor Intertia : 4000g.cm2
No of leads : 4
Phase Resisitance : 0.7Ω
Rated voltage : 3.9V
Shaft Diameter : 14mm with 5mm Key
ProductSiteLaunchDate : 2024-11-02T11:12:11.280Z
Size : Single Shaft
UnitCount : 1