Cart 2 india

Specification
Amperage : 1.6 amps
Brand : Qinlorgo
BulletPoint1 : 【Application Range】The dual motor driver module can be applied to DC motor and 4 wire step motor, can also be used to drive 2 DC gear motors.
BulletPoint2 : 【Efficient H Bridge】TB6612FNG is a MOSFET based H bridge integrated circuit, which is much more efficient than a transistor H bridge driver.
BulletPoint3 : 【Multiple Protection】Has protection against over current, short circuit, under voltage lockout and over temperature, with low power sleep mode.
BulletPoint4 : 【Easy To Install】Comes with a compact size and a light weight, the convenient installation can be quickly completed within minutes.
BulletPoint5 : 【Simple Using】The peripheral circuit is simple and does not require an external heat sink, works stably with high working efficiency.
ExternallyAssignedProductIdentifier1 : 0680579957815
ExternallyAssignedProductIdentifier2 : 680579957815
ItemName : Motor Drive Module, 21x21mm PCB Dual Drive Motor Module Controller Board, TB6612FNG 100KHz H Bridge Motor Driver for Dc Motor and 4 Wire Step Motor
ItemPackageDimensions_Height : 22.2 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 13.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : Qinlorgo
Material : copper
ModelNumber : MS116-1.6
NumberOfItems : 1
PartNumber : Qinlorgodutwqic3kv1903
PhaseType : Three Phase
ProductDescription : Feature:
1. Motor Driver: The dual motor driver module can be applied to DC motor and 4 wire step motor, can also be used to drive 2 DC gear motors.
2. Safe Working: Has protection against over current, short circuit, under voltage lockout and over temperature, with low power sleep mode.
3. Has H Bridge: TB6612FNG is a MOSFET based H bridge integrated circuit, which is much more efficient than a transistor H bridge driver.
4. Simple Using: The peripheral circuit is simple and does not require an external heat sink, works stably with high working efficiency.
5. Easy to Install: Comes with a compact size and a light weight, the convenient installation can be quickly completed within minutes.

Specification:
Item Type: Motor Drive Module
Material: PCB
Function: Motor drive control.
Voltage: VM connects to 12V voltage, VCC connects to 5V voltage.
Single H Bridge Output Current: 1.5A
STBY Pin: Normal use when connected to high level, reset the motor to stop.
Frequency: Drive frequency up to 100KHZ.
Product Size: Approx. 21 x 21mm / 0.83 x 0.83in

Package List:
2 x Motor Drive Module
4 x Pin Header

Note:
Please supply power according to the use voltage, using other voltages may cause fire and product damage.

ProductSiteLaunchDate : 2022-08-09T00:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 600 volts
Wattage : 0.6 kilowatts