Cart 2 india

Specification
Brand : UeeKKoo
BulletPoint1 : PWM Servo Motor Driver HAT with Raspberry Pi 40PIN GPIO extension header, Compatible with Raspberry Pi 5/4/3B+/ 3B Zero/Zero W/Zero WH and Jetson Nano
BulletPoint2 : I2C controlled, No extra pins required, using only 2 pins to drive servos
BulletPoint3 : Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
BulletPoint4 : Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
BulletPoint5 : Standard servo interface, supports common used servos
BulletPoint6 : Reserved I2C control pins, allows to work with other control boards
BulletPoint7 : Comes with Online Development Resources and manual : bit.ly/3ryoMht
Color1 : green
Color2 : black
CompatibleDevices : Raspberry Pi 5, Raspberry Pi 4, Raspberry Pi 3B+, Raspberry Pi 3B Zero, Raspberry Pi Zero W, Raspberry Pi Zero WH, Jetson Nano
ConnectivityTechnology : I2C
ConnectorType1 : RCA
ConnectorType2 : Mini USB
CurrentRating : 2.5 amps
ExternallyAssignedProductIdentifier1 : 0715706906043
ExternallyAssignedProductIdentifier2 : 715706906043
FinishType : Finish
IncludedComponents1 : Servo Driver HAT x1
IncludedComponents2 : RPi screws pack (2pcs) x1
InputVoltage : 5 volts
ItemName : PWM Servo Motor Driver HAT Compatible with Raspberry Pi 5/4/3B+/ 3B Zero/Zero W/Zero WH and Jetson Nano, 16-Channel 12-bit I2C Interface Straight Pinheader
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 0.6 inches
ItemPackageDimensions_Width : 0.3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : UeeKKoo
Material : Metal
ModelName : Servo Motor Driver HAT
ModelNumber : EC0561M
MountingType : Chassis Mount
NumberOfItems : 2
NumberOfPorts : 5
PartNumber : PCA9685-2pcs
PhaseType : Single Phase
PowerPlugType : no_plug
PowerSourceType : Ac Mains
ProductDescription : Overview Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.

Features
Standard Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
I2C controlled, using only 2 pins
Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
Standard servo interface, supports common used servos
Reserved I2C control pins, allows to work with other control boards

Comes with Online Development Resources and manual : bit.ly/3ryoMht

Specifications
Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
Servo voltage: 5V
Logic voltage: 3.3V
Driver: PCA9685
Control interface: I2C
Dimension: 65mm x 30mm
Mounting hole size: 3.0mm

This HAT provides 2 options for the onboard pinheader:
Servo Driver HAT: straight pinheader, same size as the Pi Zero, convenient for integration
Servo Driver HAT (B): right angle pinheader, make it possible to connect servos even when stacking up
Except pinheader, the PCB and all other function/properties are exactly the same.

Package Content
Servo Driver HAT x1
RPi screws pack (2pcs) x1

Note: Raspberry Pi and servos are NOT included.

ProductSiteLaunchDate : 2024-06-04T12:09:38.566Z
SpecificationMet : ETL
SpecificUsesForProduct : Electronic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnitCount : 5
UnspscCode : 43201500
Voltage : 10 volts
WarrantyDescription : Technical Support is provided, please feel free to contact us if you have any problem!