Cart 2 india

Specification
Amperage : 45 amps
Brand : GODIYMODULES
BulletPoint1 : The original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:
BulletPoint2 : Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
BulletPoint3 : Tested compatible For Arduino UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove.
BulletPoint4 : Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
BulletPoint5 : Starter - Voltage: 12V Rotation: Clockwise Teeth On Drive / Splines: 9 Country Of Origin: CN Source: Aftermarket
Color : Blue
ExternallyAssignedProductIdentifier : 7649652632165
ExternallyAssignedProductIdentifier1 : 0739597571739
ExternallyAssignedProductIdentifier2 : 739597571739
ItemName : TB6612 Mosfet Stepper Motor PCA9685 Standard IIC I2C PWM Servo Driver Shield V2 for Arduino Robot PWM Mega R3 Replace L293D
ItemPackageDimensions_Height : 13.9954 centimeters
ItemPackageDimensions_Length : 4.2926 centimeters
ItemPackageDimensions_Width : 11.5062 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : GODIYMODULES
Material : Plastic
ModelName : NSIXSURIM
ModelNumber : NSIXSURIM
MountingType : DIN Rail Mount
NumberOfItems : 1
OperationMode : Motor
PartNumber : Mod-MSSRV2-001
PhaseType : Three Phase
ProductDescription :

Supply voltage: 8-35V

Logic voltage: 5-12V

Reference voltage: 5.5V

Output on-resistance: 320-430M ohms per driver

Diode forward voltage: 1.2V per driver

Driver output current: ±2A

Size: 6.8X5.2CM

For A rduino interface is fully compatible with the extension. and  communication through 2c and address can be modified. It can take two motors with direct WM drive output. Up to four DC brush motors or two four-wire stepper motors can be connected. Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A peak,peak L298N module. We now have the TB6612 MOSFET driver: 1.2A and 3A peak current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and for Arduinos PWM pins, we have a fully dedicated pWM driver on the chip. The chip handles all the motor and speed control on the 2C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.

ProductSiteLaunchDate : 2024-07-22T01:37:14.648Z
Size : 6000
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 8 volts
Wattage : 1.1 kilowatts