Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Driven Racing Oil
BulletPoint : Suggested by Manitou for their bicycle forks
BulletPoint1 : Higher / Correct Level of ZDDP to provide protection during initial engine start-up and proper Camshaft & Lifter Break In (Flat Tappet, Roller, Solid, Hydraulic,)
BulletPoint2 : Multi-Viscosity for better flow to provide faster lubrication at start up.
BulletPoint3 : GP-1 Pennsylvania Grade Mineral Base Oil combined with High Shear Stable Polymer provide excellent ring seal for more efficient Break In.
BulletPoint4 : Low Detergent formulation
BulletPoint5 : Formulated specifically for Break In – NO ADDITIONAL ADDITIVES SHOULD BE USED.
BulletPoint6 : Recommended and used by Top Engine Builders.
CompatibleWithVehicleType : Various types of vehicles with internal combustion engines
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier : 00810083860015
ExternallyAssignedProductIdentifier1 : 0696310430899
ExternallyAssignedProductIdentifier2 : 696310430899
ItemName : Driven Racing Oil GP-1 Conventional Break-In Motor Oil 20w-50 (1 Gallon)
ItemPackageDimensions_Height : 29.0068 centimeters
ItemPackageDimensions_Length : 11.811 centimeters
ItemPackageDimensions_Width : 18.0086 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-oils
LiquidVolume : 128 fluid_ounces
Manufacturer : Driven Racing Oil
ModelNumber : 4350301308
NumberOfItems : 1
OemEquivalentPartNumber : 85-0022
PackageLevel : unit
PartNumber : 19556
ProductDescription :

DRIVEN Racing Oil GP-1 Conventional Break-In Motor Oil 20w-50

What is Break In Oil?

Break In oils are essential to the long life of your newly rebuilt or crate engine. Driven Break In Oils are specifically formulated to protect new camshafts, lifters, pistons & cylinders and engine rotating assemblies from the initial wear that occurs during the first start up. Driven Break in oils are formulated to promote the final “wear in” of the new engine parts. Driven Break In Oils are formulated just for Break In and offer improvement over the Straight Weight, Monograde Non Detergent Oils of the past typically used for Break in.

How to Use

For best results, use this product for the first 30 mins of initial engine start up, drain and install a new filter. Then add New fresh DRIVEN Racing Oil GP-1 Conventional Break-In Motor Oil 20w-50 and run for 300-400 miles until the engine achieves break in. It is recommended you purchase enough break in oil for TWO oil changes. 

EXAMPLE your engine needs 6 quarts to fill, so purchase 12 quarts break in oil.

ProductSiteLaunchDate : 2022-03-08T22:07:49.204Z
Style : Does Not Apply
UnitCount : 1
UnspscCode : 15121500
Viscosity : 20W-50