Cart 2 india

Specification
Brand : ZJchao
BulletPoint : 5pcs Motor Controller Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Uses a Full H-Bridge Driver Module Full-Bridge MOSFET Driver Chip
BulletPoint1 : [Soft Start] The motor regulator features function, it can solve the dge caused by instantaneous high current to speed controller.
BulletPoint2 : Blocking Protection(20A current limited) --- DC motor speed controller can limit the high current produced by the blocking of the motor, also with low voltage and stall/over-current protection
BulletPoint3 : can solve the dge caused by instantaneous high current to speed controller.
BulletPoint4 : With low voltage and stall/over-current protection.
BulletPoint5 : [] The speed controller is made with circuit board which ensures a longer service life.
Color : Blue
ExternallyAssignedProductIdentifier : 8371863629724
ExternallyAssignedProductIdentifier1 : 0755752723829
ExternallyAssignedProductIdentifier2 : 755752723829
IncludedComponents : No
ItemName : 20A 10-60V 12V 24V 36V 48V PWM DC Motor Speed Cont Regulator 20A, Motor Speed Controller Device with Soft Start, Automated Industry
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Zetiling
Material : copper
ModelName : Acogedorkx31df7gth-12
ModelNumber : ZJchao7gxfy526vi
NumberOfItems : 1
PartNumber : ZJchao7gxfy526vi
ProductDescription : 1. can solve the damage caused by instantaneous high current to speed controller.
2. Blocking protection(20A current limited) can limit the high current produced by the blocking of the motor.
3. Panel switch control makes it more easy to control the speed.
4. Ultra-high power control. The maximum current is 20A. It is recommended not to exceed it.
5. With low voltage and stall/over-current protection.

Specification:
Feature:
can solve the damage caused by instantaneous high current to speed controller.
Blocking protection(20A current limited) can limit the high current produced by the blocking of the motor.
Panel switch control makes it more easy to control the speed.
Ultra-high power control. The maximum current is 20A. It is recommended not to exceed it.
With low voltage and stall/over-current protection.
Specification:
Input voltage: DC 10-60V (The specific voltage must be the same as the rated voltage of the motor)
Output voltage: Linear output under load
Current: 0-20A (Limited value 20A)
Regulating type: regulating current
Regulating method: potentiometer(270° linear)
Regulating speed range: 0-
Control frequency: 15KHZ
Knob: 10K(with switch)
Size: Approx. 9.6 x 6.1 x 3.4cm / 3.78 x 2.4 x 1.34inch
Weight: 107g

Package Included:
1 x DC Motor Speed Controller

Note:
The input terminal must be divided into positive and negative input.
The input voltage must be the same as the rated voltage of the motor(within DC 10-60V).
Can not input AC 220V, or it will burn up the module directly.
Blocking is not a power cut, it is current value of 20A.
Please allow 1-3cm differences due to manual measurement. Thank you for your
ProductSiteLaunchDate : 2024-09-12T17:36:06.075Z
Size : default
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 7 volts_of_direct_current