Cart 2 india

Specification
Amperage : 15 amps
Brand : Cermant
BulletPoint1 : Voltage Range: DC 5-36V ，The trigger source: digital high-low (DC3.3V - 20V)continuous current: 15A, enhance cooling conditions, the maximum current up to 30A，Power Output: 400W
BulletPoint2 : Uses imported dual MOSFETs in parallel for lower internal resistance and higher conductivity。 Optimized heat dissipation structure ensures stable long-term operation without overheating。 High reliability: Supports wide temperature range (-40℃ to 85℃)
BulletPoint3 : PERFECT SUPPORT PWM: You can access the PWM signal, the signal frequency 0--20KHZ perfect support.
BulletPoint4 : Supporting Multiple Signal Source Triggers: Can be connected microcontroller IO port, PLC interfaces, DC power, etc.
BulletPoint5 : You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro pumps, solenoid valves, etc., can input PWM, control motor speed, lamp brightness and so on.
Color : default
ExternallyAssignedProductIdentifier : 9588110695336
ExternallyAssignedProductIdentifier1 : 0687117700841
ExternallyAssignedProductIdentifier2 : 687117700841
IncludedComponents : pcb
ItemName : Cermant 10pcs DC 5-36V 15A(Max 30A) 400W Dual High-Power MOSFET Trigger Switch Drive Module 0-20KHz PWM Electronic Control Board for Motor Speed and Lamp Brightness Adjustment
ItemPackageDimensions_Height : 2.3 inches
ItemPackageDimensions_Length : 0.2 inches
ItemPackageDimensions_Width : 2.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Cermant
Material : Aluminium Alloy
ModelName : zip
ModelNumber : 543aab30-a66f-4182-b326-546246a9ba65
NumberOfBoxes : 1
NumberOfItems : 10
PartNumber : Celent_CL562
ProductDescription : The board is a high - power MOS trigger switch driver module and control board. It uses field - effect tubes to adjust the electronic switch. By adopting a double - MOS parallel active output design, it features lower internal resistance, larger current, and higher power.
Under normal temperature, it can operate at 15A and 400W, which meets the usage requirements of most devices and enables easy control of high - power devices. Moreover, it can be applied to high - power devices that can be controlled via the output terminal, such as electric motors and light bulbs, to control the motor speed and the brightness of the bulbs.
Certainly, it can also be used for devices that require PWM input for control, including LED light belts, DC motors, micro - pumps, and solenoid valves.
Technical Specifications:
Operating Voltage: DC 5V - 36V
The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support
Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W, Enhance cooling conditions, the maximum current up to 30A
Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc., can input PWM, control motor speed, lamp brightness and so on
Operating temperature: -40-85 ℃
Dimension: 34mm x 17mm x 12mm/ 1.34×0.67×0.47 inch(L × W × H)

Package includes:
10 X MOS FET Trigger Switch Drive Module

ProductSiteLaunchDate : 2025-03-10T08:59:51.122Z
Size : 35A Controller and UKC1 Color Display
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39121521
Voltage : 36 volts_of_direct_current
Wattage : 400 watts