Cart 2 india

Specification
Brand : PXRZXBICQ
BulletPoint1 : Suitable for driving 2-phase stepper motors with dynamic voltage of 20V to 50V, and maximum driving current less than 4.2A. Motor driver: 9V-42V DC power supply, H-bridge bipolar constant current drive. 8 types of output current up to 4.0A
BulletPoint2 : Suitable for Nema 17, Nema 23 and Nema34 stepper motors, 2-phase hybrid stepper motors (outer diameter: 42, 57, 86mm).
BulletPoint3 : Suitable for various stepper motors of NEMA size 17, 23 and 24 (42 * 42mm to 60 * 60mm). Can be applied to various machines such as XYZ workbench, labeling machine, laser cutting machine, engraving machine, pick and place equipment, etc.
BulletPoint4 : Protection form: overheat protection, overcurrent protection, undervoltage protection, anti-reverse.
BulletPoint5 : This high-subdivision driver is suitable for high-subdivision motors. Suitable for stepper motors: 42, 57, 86 type 2 phase 4 phase (4 wire, 6 wire, 8 wire)
Color : One Color
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 7320503186173
ItemName : Generator Controller diesel genset parts ASM18G automatic start power protection electronic monitor board pannel control module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : motor-speed-controllers
Manufacturer : PXRZXBICQ
ModelName : PXRZXBICQ
ModelNumber : PXRZXBICQ
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PXRZXBICQ
ProductDescription : Generator Controller / diesel generator set controller / ASM18G
ASM18G generator set is automatic control and security modules. Can be selected by pressing
a button on the module panel manual or automatic control mode, manual mode , stop the generator set can be opened by pressing a button on the control panel , manual ; in automatic mode, the default remote start switch input signal to automatically open to stop generator sets. Module operating status and operating parameters using the LCD display generator. Its main features :
l using a microprocessor core ;
l through the panel buttons and LCD protection parameters can be flexibly set operation ;
l measurements show that the generator frequency and voltage , battery voltage , engine speed , water temperature, oil pressure , fuel oil , and run-time parameters ;
l Rd relay outputs , in addition to the fuel valve and start output is fixed , and the remaining three-way customizable by the user ;
l custom three-way switch input ;
l three analog inputs , which are used to connect the water temperature , oil pressure and fuel sensor ;
l Optional ATS dual power switch control signal , eliminating the need for ATS switch controller , reducing overall system cost ;
l Optional idle speed control signal and increases the speed control signal applied to the electronic engine speed and mechanical governor ;
l optional preheating , the alarm output signal ;
l built a variety of pressure and temperature sensor type for users to choose ;
l Built-in communication ports, parameters can be set via the PC 's USB port ;
l support MODBUS communication protocol, optional communication module 485 can be remotely monitored via PC;
l pluggable quick-connect terminals , wiring, moving , maintenance, replacement and more convenient ;
l high-voltage power supply designed to withstand the removal of the battery , the charger voltage surges caused by the impact , more reliable
ProductSiteLaunchDate : 2024-11-12T07:27:42.855Z
Size : One Size
UnitCount : 1
UnspscCode : 26000000
Voltage : 50 volts_of_alternating_current
WarrantyDescription : No warranty.