Cart 2 india

Specification
Brand : PXRZXBICQ
BulletPoint1 : [FLEXIBLE SPEED CONTROL] Supports stop, forward, and reverse functions for enhanced usability
BulletPoint2 : [HIGH-QUALITY PERFORMANCE] Made of top-notch electronic components for stability and reliability
BulletPoint3 : [WIDE VOLTAGE RANGE] Supports DC 12-60V input voltage and up to 10A current
BulletPoint4 : [COMPACT DESIGN] Easy installation in tight spaces for convenience
BulletPoint5 : [SIMPLE CONTROL] Easily adjust motor rotation using the intuitive knob
Color : One Color
ExternallyAssignedProductIdentifier : 7320503186104
IncludedComponents : No
ItemName : Generator Controller unit 501K auto start control pannel DSE501K Diesel brushless electronic board genset part replace
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : PXRZXBICQ
ModelName : PXRZXBICQ
ModelNumber : PXRZXBICQ
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PXRZXBICQ
ProductDescription : Gdianxiaobao_1enerator Controller 501K,The Model
501K-1 is a Manual Engine Control Module,Key Start Module: 501K, 701...
Control Modules are provided as follows:
1) Key Start Module: 501K, 701, 702;
2) Auto Start
Module: 5110, 5210;
3) Auto/ AMF Start Module: 5120, 5220, 704
The Model 501K-1 is a Manual Engine Control Module, which has
been designed to manually control the engine via a key switch on The front
panel. The module is used to start and stop the engine, indicating fault
conditions; automatically shutting down the engine and indicating the engine
failure by LED giving true first up fault annunciation. Operation of
the module is via a three position key switch mounted on the front panel with
STOP(O), RUN(I) and START(II) positions. In the 'O' position the DC supply is
removed from the module and the run relay and alarm output are de-energised. If
the switch is turned to the 'I' position the module is powered up and the run
relay is energised, activating the engine fuel/ignition system and the
protection hold-off timer is initiated. If the switch is moved to the 'II'
position and held against the spring , a positive supply is applied to the
relevant output terminal and on to the starter motor. Once the engine has
started the switch should be released and allowed to to the 'I' position.
Operation of any of the following alarms; Low Oil Pressure, High Engine
Temperature, Auxiliary Shutdown, Overspeed (Optional), will cause the run relay
to de-energise.This will remove the fuel/ignition supply from he engine and
bring it to rest. The alarm output will be activated giving a positive DC
output.
Each alarm channel has it's own LED indicator and once
activated no further alarm conditions will be accepted. The alarm output and
relevant LED will remain active until the unit is reset by turning the switch to
the 'O' position.
Overspeed Protection (Op
ProductSiteLaunchDate : 2024-11-12T07:46:22.867Z
Size : One Size
UnitCount : 1
UnspscCode : 26000000
WarrantyDescription : No warranty.