Specification Brand : Johnson Controls BulletPoint1 : Soft start capability provides a smooth fan startup, which reduces motor-starting noise and abrupt changes in motor speed BulletPoint2 : 208-240/277/480 VAC, 60 Hz motor control suitable for a wide range of condenser fan motor applications BulletPoint3 : Two Effective Throttling Ranges (ETRs) provide either a 30 or 60 psi (207 or 414 kPa) ETR BulletPoint4 : NEMA 1 or NEMA 3R (Rainproof) enclosures allows indoor and panel mounting or outdoor mounting BulletPoint5 : Built-in voltage surge protection, Radio Frequency Interference (RFI) suppression, and ground terminal screw Color : Green ControlMethod : application ExternallyAssignedProductIdentifier : 10785028292657 ExternallyAssignedProductIdentifier1 : 696334136395 ExternallyAssignedProductIdentifier2 : 0696334136395 IncludedComponents : 10 x Indicator Light ItemName : Johnson Controls P66AAB-26C Series P66 Electronic Fan Speed Control, Single Input Sensor Models, 220-280 psig Operating Range, 40 Start Voltage, 60" Capillary Length ItemPackageDimensions_Height : 7 inches ItemPackageDimensions_Length : 7 inches ItemPackageDimensions_Width : 7 inches ItemPackageQuantity : 1 ItemShape : Round ItemTypeKeyword : motor-speed-controllers Manufacturer : Johnson Controls Inc Material : copper ModelName : Indicator Lights ModelNumber : P66AAB-26C NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : P66AAB-26C PowerSourceType : Corded Electric ProductDescription : Featuring built-in transient and surge suppression, this control is for permanent magnet or shunt-wound DC motors and gearmotors. The solid-state speed control converts line voltage input to full-wave DC power on constant- or diminishing-torque applications.
Item: DC Speed Control Enclosure: NEMA 4/12 Max. Amps: 10 Voltage Output: 0 to 90/180VDC Speed Range: 50:1 Rotation: Reversable External Switches: ON/OFF, FWD/STOP/REV AC Input Voltage: 120/240VAC DC Speed Control: SCR HP @ Lower Volts: 1/8 to 1 HP @ Higher Volts: 1/4 to 2 Linear Acceleration: Fixed 1 to 3 sec. Linear Deceleration: Fixed 0.5 sec. Current/Torque Limit: Adjustable Speed Regulation: +/-1% of Motor Base Speed Shunt Wound Volts: 100/200VDC Accepts Tach Feedback: Yes Dynamic Braking: Yes Power On Light: Yes IR Compensation: Adjustable Mount Type: Wall Height: 9.5" Depth: 5.5" Width: 5" Operating Temp.: -10 Degrees to 45 Degrees C For Use With: For Packaging Equipment, Pumps, Fans, Blowers, Conveyors and Other Constant or Diminishing Torque Standards: cULus Listed Includes: Run/Stop Switch, Built-in Transient and Surge Suppression ProductSiteLaunchDate : 2014-12-11T22:42:22.590Z Size : 24V SpecificationMet : ma StreetDate : 2018-08-09T00:00:01Z Style : Modern SupplierDeclaredDgHzRegulation : unknown UnitCount : 1 UnspscCode : 40101600 WarrantyDescription : Not applicable.