Cart 2 india

Specification
Brand : Jyving
BulletPoint1 : Size: approx. 79*43*26mm.Install Hole Size: approx. 76.5*39.3mm.Working Voltage: DC 9V~60V, input anti-reverse connection protection.
BulletPoint2 : Rated Current: 12A, maximum current 20A.Maximum Power: 500W.Working Frequency: 1KHz~99KHz adjustable, 1KHz step, default frequency of 20KHz, accuracy of about 1%.
BulletPoint3 : Motor soft start function. When starting the motor, the current increases slowly and there is no shock current, which can effectively protect the motor.
BulletPoint4 : Digital encoder knob adjusts motor speed.Fine workmanship and good performance.Easy to use.Long service life.
BulletPoint5 : 1 x PWM Motor Governor.
Color : As Shown
ExternallyAssignedProductIdentifier1 : 0685330051788
ExternallyAssignedProductIdentifier2 : 685330051788
ItemName : Jyving 9-60V 12A PWM DC Motor Speed Controller Regulator Governor with Knob Switch Digital LED Display Regulator Dimmer Controller PWM
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 6.2992 centimeters
ItemPackageDimensions_Width : 11.7094 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Jyving
Material : copper
ModelNumber : Riuty09ih1kg4ma
OperatingTemperature : 60 degrees_celsius
PartNumber : JY-4001160297845
ProductDescription : Size: approx. 79*43*26mm

Install Hole Size: approx. 76.5*39.3mm

Working Voltage: DC 9V~60V, input anti-reverse connection protection

Rated Current: 12A, maximum current 20A

Maximum Power: 500W

Working Frequency: 1KHz~99KHz adjustable, 1KHz step, default frequency of 20KHz, accuracy of about 1%

Duty Cycle: 0-100%, 1% step



Feature:

Equipped with start-stop button, and can be external switch control, to meet various customer control requirements

(note: the external switch should use the self-reset button or key, press to open and then press to close; It can't realize the function of opening output when it is closed all the time, and closing output when it is not closed.)

Motor soft start function. When starting the motor, the current increases slowly and there is no shock current, which can effectively protect the motor.

Digital encoder knob adjusts motor speed.

Fine workmanship and good performance.

Easy to use.

Long service life.



Operation of Digital Encoder Knob:

In the Default Interface: (the duty cycle is displayed by default)

Short Press: switch motor start and stop

Long Press 10s: to enter the setting interface

Counterclockwise Rotation: the duty ratio decreases

Clockwise Rotation: increased duty cycle



Under the Setting Screen:

Short Press: select setting parameters and switch between ON-OFF, duty cycle lower limit, duty cycle upper limit and working frequency.

ON-OFF is to set the module to be normally open or closed by default. Rotate the encoder to switch to the default on-off state. The display form of duty cycle lower limit is "L" + two digits, the display form of duty cycle upper limit is "H" + two digits or "100", and the display form of working frequency is "F" + two digits.



Package Included:

1 x PWM Motor Governor

ProductSiteLaunchDate : 2021-08-07T02:01:06.057Z
Size : 79*43*26mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
Voltage : 110 volts