Cart 2 india

Specification
AgeRangeDescription : adult
Brand : NDNCZDHC
BulletPoint1 : The trigger circuit is unique, and the control voltage is regulated accurately without hysteresis. After the resistive load is turned off to 0, it is adjusted from 10V after it is turned on, and adjusted to the maximum power voltage close to the input.
BulletPoint2 : Protection Circuit: The voltage regulator's thyristor is equipped with an RC absorption protection circuit.
BulletPoint3 : Cooling System: This voltage regulator comes with an upgraded fan under intelligent switch control, ensuring efficient heat dissipation and a prolonged lifespan.
BulletPoint4 : Shell Design: The voltage regulator is encased in a standard, high - grade, exquisite aluminum shell, enhancing safety and practicality.
BulletPoint5 : Binding Posts: The voltage regulator has brand - upgraded full copper 75A ultra - high current binding posts.
BulletPoint6 : It is made of high-quality materials and is durable.
Color : 3ph380V-3ph380V
ExternallyAssignedProductIdentifier : 7661511122921
IncludedComponents : No
ItemName : NDNCZDHC Voltage Regulator 10000w Motor 75A Ac Motor Speed Controller Ac 110v to 230v Use Voltage Power Thyristors
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : NDNCZDHC
ModelName : EJWFASCV
ModelNumber : NDNCZDHCe854y2g3tf
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NDNCZDHCe854y2g3tf
ProductDescription : Item Type: AC Voltage Regulator
Use Voltage: AC 110V-230V
Maximum Power: 10000W (resistive load)
Voltage Regulation: Ac 0V- adjustable between proximity input voltages

Instructions:
Connect the thyristor voltage regulator in front of the electrical circuit of the consumer, and connect the input and output wires respectively (without the zero-fire wire). Rotate the potentiometer knob to play light and dark dimming, speed, voltage, and temperature Role; very easy to use.
Application:
Using new bidirectional ultra-high power thyristor, thyristor standard 100A, resistive load can be adjusted arbitrarily between 0-input voltage for electrical appliances. Such as: electric furnaces, water heaters, lamps and lanterns, large motors and motors. So as to achieve the effects of dimming, temperature and pressure.
It can be used for large appliances with an electric power of less than 10,000 kilowatts (pure resistive load). Because of the large power, ordinary household appliances or small factories are sufficient. (The inductive or capacitive load has a large starting current, which is 2-4 times the usual work. The power should be reduced during use, and it is best to leave less than half of the margin.)

Package List：
1 X SCR Voltage Regulator
Note:
Pay attention that the load cannot exceed the specified maximum power. Pay attention to the temperature rise for the first use. If the temperature is very high (more than 80 degrees), the heat dissipation must be strengthened, otherwise the module and the electrical appliances will be burned out. For a large reduction, at least half of the margin should be left.

ProductSiteLaunchDate : 2025-05-19T13:17:51.498Z
Size : 1.5kw
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 56101700