Cart 2 india

Specification
Brand : Vikye
BulletPoint : The SS300-24 Electronic Speed Switch is a 24 volt single set point speed switch with SPDT relay dry contact output, which uses a magnetic pickup input signal. The trip point is set by a potentiometer. An LED indicates when the signal source is present. A second LED turns on when the trip point is reached. An optional time delay is on board to delay operation of the relay for 2-6 seconds after the set point has been reached.
BulletPoint1 : ✪✪✪✪✪ [Good Performance and Safety] This element holds a two-way high-power silicon controlled rectifier and the current can be up to 20A, which is a solution for stove power cord overcurrent caused by low resistance during cooling.
BulletPoint2 : ✪✪✪✪✪ [Convenient use] Convenient to use, simply connect the input terminals to the live cable or to the neutral cable (110 V to 220 V) and go up to the load, then rotate the knob to control the voltage .
BulletPoint3 : ✪✪✪✪✪ [Wide Regulation Range] With a wide voltage regulation range, the output voltage can easily be adjusted from 0V to input voltage.
BulletPoint4 : ✪✪✪✪✪ [Variety of Functions] It could be widely used as a heat controller in electric stoves, water heaters, dimmer in lamps, speed controller in small motors, or temperature controller in electric soldering iron, etc.
BulletPoint5 : ✪✪✪✪✪ [Notes] The resistive load power should be less than 4000W, and the power should be greatly reduced (half or more) for inductive or capacitive loads; on the contrary, the controller and the load will burn.
CircuitType : 1-way
Color : Black
ConnectivityProtocol : X-10
ConnectivityTechnology : Power Cord
ConnectorType : Screw
ControlMethod : remote
ExternallyAssignedProductIdentifier1 : 0765192089577
ExternallyAssignedProductIdentifier2 : 765192089577
FitType : Universal
IncludedComponents1 : Microcontroller
IncludedComponents2 : Power Supply
InternationalProtectionRating : IP54
ItemDisplayWeight : 5 pounds
ItemName : SCR Controller, 4000W SCR Electric Voltage Regulator Dimmer Temperature Motor Speed Controller with Fan AC110V to 220V for Controlling Light Brightness, Speed or Temperature
ItemPackageDimensions_Height : 8.382 centimeters
ItemPackageDimensions_Length : 1.27 centimeters
ItemPackageDimensions_Width : 3.556 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Vikye
Material : Steel
Material1 : Plastic
Material2 : Copper
Material3 : Brass
MeterType : Distance, Speed, Calories Burned, Time
ModelNumber : f4qnuk5asg
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperatingVoltage : 24 volts
OperationMode : automatic
PartNumber : f4qnuk5asg
PowerSourceType : Corded Electric
ProductDescription : Description:
This is a easy-to use voltage regulator for controlling light brightness, speed or temperature. The big power voltage regulator is equipped with two-way silicon controlled rectifier, which is very convenient and practical. The voltage regulator has a large power and can be used for large household or small industrial electrical appliances of which power is less than 4000W(for resistive loads only, power should be reduced for inductive or capacitive loads).


Features:
This item has two-way large power silicon controlled rectifier and the current can be up to 20A, which is a good solution to over current of electric stove wire caused by low resistance during cooling. Convenient to use, simply connect input terminals to either live wire or neutral wire(110V to 220V) and output to load, then rotate knob to control voltage.
With a wide voltage regulating range, the output voltage can be easily adjusted from 0V to input voltage. Could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc. The resistive load power should be less than 4000W, and power should be largely reduced(half or more) for inductive or capacitive loads, otherwise controller and load will burn out.


Specifications:
Input Voltage: AC110V to 220V
Max Power: 4000W(resistive load)
Output Voltage: Variable from 0V to input voltage
Size: 85 x 60 x 45mm / 3.34 x 2.36 x 1.77"


Package Includes:
1 x Voltage Regulator


Note: The maximum output voltage is equal to input voltage, e.g. if input 110V AC, the maximum output voltage is 110V AC; if input 220V AC, the maximum output voltage is 220V AC.


ProductGrade : Replacement Part
ProductSiteLaunchDate : 2019-04-18T11:54:29.254Z
RecommendedUsesForProduct : Stationary Bike
SpecificationMet : ETL
Style : Simple
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType1 : Limit Switch
SwitchType2 : Pressure Switch
TargetAudience : Adult
TerminalType : Spdt
UnitCount : 1
UnspscCode : 26111500
Voltage : 110 volts_of_alternating_current
WarrantyDescription : 1 Year