Cart 2 india

Specification
Brand : DAHUA ZUNWEI
BulletPoint1 : Precision quality: sufficient materials, light speed, low noise, long-lasting use
BulletPoint2 : High-precision : high-efficiency thickened tile magnet, ultra-long high-efficiency high-temperature resistant permanent magnet
BulletPoint3 : Thickened aluminum shell: fast heat dissipation, anti-corrosion coating, anti-rust and corrosion
BulletPoint4 : High-power motor: strong power, giving you a full sense of security and free travel
BulletPoint5 : Wide application: suitable for a variety of electric vehicles
Color : 60V
CompatibleWithVehicleType : Razor Crazy Cart Version 7+, Crazy Cart XL Version 3 and above
ExternallyAssignedProductIdentifier : 9036515780404
ExternallyAssignedProductIdentifier1 : 0747495769196
ExternallyAssignedProductIdentifier2 : 747495769196
FitType : Universal Fit
IncludedComponents : No
ItemName : 1500W-4000W Electric Tricycle Motor 60V/72V – High-Power DC Brushless, 4-Bolt Mount, Motor Only(60V,4000W)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-engine-radiator-cooling-fan-motor-relay
LoadIndex : 70
Manufacturer : DAHUA ZUNWEI
Material : Aluminum, Rubber
ModelName : DAHUA ZUNWEI
ModelNumber : DAHUA ZUNWEI
NumberOfItems : 1
OemEquivalentPartNumber : W25143401048-PA
PartNumber : DAHUA ZUNWEI
ProductDescription : Voltage: 60V/72V
Power: 1500W/2200W/3000W
Rpm: 3200/3400

Motor Hall Inspection Method
A. Visual Inspection
Check whether the wire color of each plug is connected correctly, and whether the plug and spring of the connector are reliably connected. To avoid wrong connection or poor contact and failure to work properly.
B. Hall Detection Method
1. Multimeter Detection Method
a) Use the multimeter voltage range (DC 20V) to measure whether the voltage between the Hall power supply (red and black wires) is 4.3V.
b) Use the multimeter voltage range (DC 20V) to observe the working voltage of the Hall signal line (yellow, green and blue) to the ground respectively. Slowly reverse the motor and observe whether the voltage of each signal line changes between 0V---4.3V. If a phase does not change, it means that the Hall of this phase is broken.
2. Hall Inspection Method
The Hall connector of the Hall detector is connected to the motor and the power is turned on. Slowly reverse the motor and observe whether the LED corresponding to each signal line flashes. If a phase does not change, it means that the Hall sensor of this phase is broken.
ProductSiteLaunchDate : 2025-05-13T12:30:06.405Z
Size : 4000W
Speed : 480 rpm
Style : 350W 36V
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26101200
Voltage : 72 volts
Wattage : 3 kilowatts
WebsiteShippingWeight : 0.29 kilograms