Cart 2 india

Specification
Brand : AGULIUM
BulletPoint : Part number:OMM32-151G0006
BulletPoint1 : Powerful Power: High speed (continuous: 879 rpm; intermittent: 975 rpm) and high torque (continuous: 81 N*M; intermittent: 108 N*M) bring you greater power
BulletPoint2 : High Precision: The precision processed stator and rotor whose flatness error does not exceed 0.08 inches have high precision.
BulletPoint3 : Selected Material: This hydraulic motor adopts a powder metallurgy valve disc and low carbon alloy steel output shaft, which is not easy to wear
BulletPoint4 : Good Sealing: The oil seal adopts three layers of the sealing ring to bear pressure, which can effectively avoid oil leakage
BulletPoint5 : Strong Pressure Resistance: The S-type bearing shaft has a strong radial force and high-pressure resistance, which can effectively extend the service life of the hydraulic motor
ExternallyAssignedProductIdentifier : 9344448610287
ExternallyAssignedProductIdentifier1 : 0739378555699
ExternallyAssignedProductIdentifier2 : 739378555699
IncludedComponents : 1 * Hydraulic Motor
ItemName : AGULIUM Hydraulic Motor for The Char-Lynn 101-1001-009, Hydraulic Motor for The Eaton 101-1001
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-motors
Manufacturer : AGULIUM
Material : Cast Iron
ModelName : SK60-2
ModelNumber : AM123681
NumberOfItems : 1
PartNumber : GY426DS8WDW
ProductDescription :

Application

This product is generally applied to harvesting machines, augers, horizontal directional drilling rigs, coal mine type drilling rigs, trenching machines, lawn mower, food machinery, snow plow, concrete mixer, pump truck, sanitation machinery, etc.

Specification

• Material: Cast Iron, Low Carbon Alloy Steel
• Color: Black
• Process: Powder Metallurgy
• Compatible: For the Char-Lynn 101-1001-009 and for the Eaton 101-1001
• Shaft: 2.54cm/1 Inch Straight w/Woodruff Key O-Ring
• Mount:  4 Bolt Flange
• Port Size:  ½ NPTF   
• Displacement: 50ML/R 1.69Oz/R
• Flow Rate: Continuous: 45LPM; Intermittent: 50LPM
• Speed: Continuous: 879rpm; Intermittent: 975rpm
• Pressure: Continuous: 12.5MPA; Intermittent: 16.5MPA
• Torque: Continuous: 81N*M; Intermittent: 108N*M
• Gross Weight: 12.13 lbs 
• Product Size:  3.94*3.94*7.6 in

Package

1 * Hydraulic Motor

Notes

• 1.The normal operating oil temperature of this product is 68-140 ℉, and the maximum system operating temperature is 194 ℉ (not more than 1 hour).
• 2.Filter filtration accuracy is 10-30 microns, and it is better to add a magnetic block at the bottom of the oil tank to stop metal chips from entering the system. The solid contamination level of working oil should not be higher than 19/16.
• 3.Please select the appropriate hydraulic oil according to the actual operation and ambient temperature. The oil viscosity at 104 ° F is 42-74MM2/S.
• 4.When used in series or parallel, the external drain must be used for pressure relief if the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM). It is better to connect the external drain directly with the oil tank.
• 5.The best working condition of the motor should be selected at the rated working condition of 1/3-2/3.
• 6.In order to make the motor have a long service life, when adding load to the motor, it should first operate at 30% of the rated pressure for about 1 hour. In any case, please ensure that the motor is full of oil before adding load to the motor.

ProductSiteLaunchDate : 2024-10-17T10:31:07.624Z
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 1 volts