Cart 2 india

Specification
Brand : Alpine
BulletPoint1 : 3.Be sure to connect the REM interface.when you test the amplifier,you can connect with power ground +12V.And then,you should find the ACC control wire interface which on your CD player, if the Player has no this interface,you can connect the ACC line that on the key switch.Make sure don't Press the iron, or it will short-circuit.
BulletPoint2 : 2.The GND interface must be connected to the negative pole,ground connection is OK.
BulletPoint3 : Instructions for Use: 1.Please connect the battery positive,Don't just connect a positive line casually, or it will Burn out circuit.
BulletPoint4 : 4.If you find the indicator light is red when you wiring,please unplug the power immediately and reconnect.If the red light lasts for five minutes,the protection of the amplifier will burn out.The blue light is normal.
BulletPoint5 : Designed specifically for Powersports Application
Color : Black
ExternallyAssignedProductIdentifier : 4711732494192
ExternallyAssignedProductIdentifier1 : 0810134615526
ExternallyAssignedProductIdentifier2 : 810134615526
ExternallyAssignedProductIdentifier3 : 00707773598580
IncludedComponents : (1) Apocalypse ASA-1500.2 2-Channel Amplifier
ItemName : Alpine R2-A60F R-Series 4-Channel Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 26 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-multi-channel-amplifiers
Language : english
Manufacturer : Alpine
MaximumSupplyVoltage : 16 volts
MinimumSupplyVoltage : 12 volts
ModelName : 500380766
ModelNumber : 500380766
MountingType : Freestanding
NumberOfChannels : 2
NumberOfItems : 1
OutputPower : 3800 watts
PartNumber : AlpineBDL231226-12
ProductDescription : Hi-Res Audio Certified: Capable of reproducing high-frequency sounds up to 45,000 Hz. Power Output: 100 watts RMS x 4 at 4 ohms. 150 watts RMS x 4 at 2 ohms. 300 watts RMS x 2 bridged at 4 ohms. Compact Design: Features a reduced footprint, 15% smaller than the previous model (R-A60F). Simplified Installation: Consolidated speaker connections to one side of the amplifier. Amplifier controls relocated to the top of the amplifier under a removable plate. Integrated mounting "feet" for easier installation. Class-D Amplifier Design: Enables high power output with a small footprint. Bandpass Filter: Allows for designing active speaker setups without a separate processor. Frequency Response: 10Hz - 45kHz. CTA-2006 Compliant Variable High-Pass, Low-Pass, and Bandpass Filters Optional RUX-KNOB.2 wired remote available for rear channels Preamp and Speaker-Level Inputs Speaker-Level Inputs require RCA adapter cables Speaker-Level Inputs handle up to 10V 1-Year Warranty Fuse Rating: 30A x 2 Dimensions: 11.12"W x 2.14"H x 6.92"D Power Requirements: 14.4 V.DC (9 - 16 V allowable) Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V High Level Input with automatic power on Cable size: Power Cable AWG 4, SPK Cable AWG 8 THD+N (@ 10W into 4 Ohms): <0.03% Damping Factor: >100
ProductSiteLaunchDate : 2024-08-25T21:59:33.530Z
Size : 15 x 9.4 x 2.5 inch
SpecificationMet : Smpte 424m, Smpte 292m, Smpte 344m, Smpte 259m, Dvb-asi, St-2081(6g), St2082(12g)
SpecificationMet1 : FCC
SpecificationMet2 : RoHS
SpecificationMet3 : WEEE
Style : Full Range 2-Channel
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 55.6976
UnspscCode : 52161547
Voltage : 12 volts
Wattage : 1500 watts