SpecificationBrand : KICKER
BulletPoint : Kicker 46CXA4001 Class D Amp Single 800W Peak Sub Amplifier, 46KISL Amplifier Speaker Wire to 2 Channel RCA Adapter and HA-MIDI80 Fuseholder 3 Pack 80 Amp MIDI Fuses
BulletPoint1 : Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance | 4-Layer PCB Board with Balanced Differential Inputs | Full-Range Digital Class D IR Chipset | “SNAP” Capacitors used Throughout Circuit Audiophile Grade High Tolerance Components | Spring Steel FET Clips Provide Cleaner Board Design
BulletPoint10 : Color: Black Also Available in White Dimensions: 5.27"W x 9.44"L x 1.75"H
BulletPoint2 : Illuminated Logo/Fully Concealed Mounting | Output Clip Indicators for Precise System Set Up | Fine-Tuned Fully Variable Crossover and Phase Control | Top Mounted Controls for Convenient Amplifier
BulletPoint3 : Power Supply: Full PWM | Power Supply Threshold: 10.0VDC-170VDC | Idle Current: (0.7A) | Distortion: THD 4(1KH@4Ω) : 0.06% | S/N Ratio(A weighted@1W): -80dBA | S/N Ratio(A weighted@FP): .95dBA | Input Sensitivity: Low Input Level: 200mV-5.0V | High Input Level: N/A | Input Impedance: Low Input Level: 20 KΩ | High Input Level: N/A
BulletPoint4 : Damping Factor(50Hz@4Ω): >250 | Bandwidth(-3dB): 10Hz-35KHz | Crossover(-12/24dB/Oct) | Variable High-Pass: 40Hz-400Hz(-12dB Ch1/2/3/4) | Variable Low-Pass: 30Hz-300Hz(-12dB Ch 5) | Variable Sub-Sonic: 10-55Hz @ 18 dB | Fuse Ratings: ATC: 40A X 2
BulletPoint5 : Dimensions: Length x Width x Height(Inches): 14.25" x 7.67" x 2" | Length x Width x Height(mm): 362 x 195 x 51.5
BulletPoint6 : Heavy duty aluminum alloy heat-sink Advanced rollback heat protection
BulletPoint7 : Input sensitivity: Low level: 0.2mV-10.0V High level: Up to 25W RMS
BulletPoint8 : Frequency Response: 10 - 33,000 Hz Total Harmonic Distortion (THD): 0.07% Signal to Noise Ratio: -77.4dBA
BulletPoint9 : Variable high-pass filter: 40 - 400 Hz, 24 dB/octave Variable low-pass filter: 40 - 400 Hz, 24 dB/octave 8 gauge power and ground wiring is recommended for installation.
ExternallyAssignedProductIdentifier : 7898556840880
ExternallyAssignedProductIdentifier1 : 0609483052997
ExternallyAssignedProductIdentifier2 : 609483052997
ExternallyAssignedProductIdentifier3 : 00847169024290
ItemName : Kicker 43DXA2501 Car Audio Sub Amp DXA250.1 & 8 GA Amplifier Accessory Kit Bundle
ItemPackageDimensions_Height : 23.495 centimeters
ItemPackageDimensions_Length : 7.1882 centimeters
ItemPackageDimensions_Width : 21.4884 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-multi-channel-amplifiers
Manufacturer : Kicker
MaximumSupplyVoltage : 14 volts
ModelName : XMA-5900IR
ModelNumber : KICKER17-AMP-PACK12
MountingType : Car Mount
NumberOfChannels : 5
NumberOfItems : 1
OutputPower : 1200 watts
PackageLevel : unit
PackageTypeName : Box
PartNumber : KICKER17-AMP-PACK12
ProductDescription :
This Package Includes the Following Items:
- 1 x 46CXA4001 Car Audio Class D Amp Single 800W Peak Sub Amplifier
- 1 x HA-AK8 Car Stereo Complete 8 Gauge 900W Amp Amplifier Install Kit - Nickel
- 1 x 46KISL Car Audio Amp Amplifier Speaker Wire to 2 Channel RCA Adapter KISL
- 1 x HA-MIDI80 Car Stereo Fuseholder 3 Pack 80 Amp MIDI Fuses - Nickel
46CXA4001 Car Audio Class D Amp 800W Peak Sub Amplifier:
- Power Handling:
- 300 Watts x 1 @ 2 Ohm RMS
- 600 Watts x 1 @ 2 Ohm PEAK
- 400 Watts x 1 @ 1 Ohm RMS
- 800 Watts x 1 @ 1 Ohm PEAK
- Frequency Response: 25Hz - 200Hz
- Signal to Noise Ratio: 95dB
- Input Sensitivity:
- High level 250mV-10V
- Low level 125mV-5V
- Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
46KISL Car Audio Amp Amplifier Speaker Wire to 2 Channel RCA Adapter KISL:
- 2 Ft. 2-Channel K Series Speaker Cable to RCA Adapter
- 16 Gauge speaker wire to RCAs and includes female to female adapters
- Cable Length: 2 Ft. (.6m)
- Color: Blue
ProductSiteLaunchDate : 2017-02-02T15:47:09.343Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32101500
Voltage : 5 volts
Wattage : 150 watts