Cart 2 india

Specification
Brand : KICKER
BulletPoint1 : PACKAGE BUNDLE INCLUDES: 1x KICKER KMA600.4 4x150w 4-Ch Weather-Resistant Full-Range Amp; RoHS Compliant, 1x Kicker 47KMPK8 Marine 8 Gauge Amp Power Kit
BulletPoint2 : AMPLIFIER: Using a Class-D power plant, this amp features a variable bass boost with KickEQ, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert!
BulletPoint3 : AMPLIFIER: A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 150 watts into four channels, or 300 watts bridged into two channels. See below for more details.
BulletPoint4 : WIRING KIT: This Kicker amp kit meets the highest industry standards for marine use. Includes a fuse, fuse holder, power and ground cabling plus remote wire.
BulletPoint5 : WIRING KIT: This kit is the all in one solution for power delivery. The full-spec OFC cable is tinned in anti-corrosive nickel.
ExternallyAssignedProductIdentifier1 : 715442242153
ExternallyAssignedProductIdentifier2 : 0715442242153
ItemName : KICKER KMA600.4 4x150w 4-Ch Weather-Resistant Full-Range Amp, with Marine 8 Gauge Amp Power Kit
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 12 inches
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-multi-channel-amplifiers
Manufacturer : Kicker
Material : Electronic components, metal
MaximumSupplyVoltage : 12 volts_of_direct_current
ModelName : 48KMA600.4+47KMPK8+KOOZIE
ModelNumber : 48KMA600.4+47KMPK8+KOOZIE
MountingType : Surface Mount
NumberOfChannels : 4
NumberOfItems : 1
OutputPower : 600 watts
PackageTypeName : Bundle
PartNumber : 48KMA6004-47KMPK8-KoozEnrock-KoozKicker
ProductDescription : General Features Amp: Class D Power Supply 725 Watts of Dynamic Power Four-Channel Amplifier with Bridging Capability Conformal-Coated Circuit Board Variable 12dB Crossover KickEQ Variable 6dB Bass Boost Real Marine ABYC/NMMA-Compliant Power Connections 316L Stainless-Steel Hardware Included POWER [watts/ch], 2 OHM STEREO: 150 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 300 x 2 DYNAMIC POWER [watts]: 725 DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16 DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5 FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB High Level Sensitivity: 250mV-10V Low Level Sensitivity: 125mV-5V SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass KickEQ BOOST: Variable 0-6dB, centered @ 40Hz General Features Amp Kit: Class D Power Supply 725 Watts of Dynamic Power Four-Channel Amplifier with Bridging Capability Conformal-Coated Circuit Board Variable 12dB Crossover KickEQ Variable 6dB Bass Boost Real Marine ABYC/NMMA-Compliant Power Connections 316L Stainless-Steel Hardware Included POWER [watts/ch], 2 OHM STEREO: 150 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 300 x 2 DYNAMIC POWER [watts]: 725 DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16 DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5 FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB High Level Sensitivity: 250mV-10V Low Level Sensitivity: 125mV-5V SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass KickEQ BOOST:
ProductSiteLaunchDate : 2023-12-21T00:00:00.000-08:00
SpecificationMet : RoHS
SpecificationMet1 : FCC
SpecificationMet2 : CE
SpecificationMet3 : RoHS
SpecificationMet4 : WEEE
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161547
Voltage : 250 millivolts