SpecificationBrakeStyle : Caliper
Brand : Terske
BulletPoint1 : Precision machined from SAE 420 stainless steel
BulletPoint2 : Reassuringly dense and 36g light
BulletPoint3 : For use with 12mm thru axles with a 3mm minumum wall thickness
BulletPoint4 : 【Safe and Reliable】protect the hoses and joints and make you job done cleanly, come with storage case and extra thimble for replacement for long-term usage
BulletPoint5 : 【Professional】Professional manufacturing, craftsmanship and high accuracy ,upgrade your biking experience with this high-quality and efficient oiling needle inserting tool
Color : Stainless
ExternallyAssignedProductIdentifier : 4710949321970
ExternallyAssignedProductIdentifier1 : 051716990116
ExternallyAssignedProductIdentifier2 : 0051716990116
FinishType : Machined
FoldedSize : 7.85 x 6.4 x 1.75 inches
GpsrSafetyAttestation : 1
IncludedComponents : Axe
IncludedComponents1 : Motor Axle Nut Removal Tool
IncludedComponents2 : Wrench
IncludedComponents3 : Hex Tool
IncludedComponents4 : Diagonal Cutters
IncludedComponents5 : Zip Ties
ItemDisplayDimensions_Height : 16 millimeters
ItemDisplayDimensions_Length : 47 millimeters
ItemDisplayDimensions_Width : 20 millimeters
ItemDisplayWeight : 36 grams
ItemName : Travel 6/8/16mm Hex Tool for Pedals, UDH Derailleur Hangers, Cranks, and Cinch Lockrings
ItemPackageDimensions_Height : 11.1 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTorque : 40 newton_meters
ItemTypeKeyword : bike-multifunction-tools
Manufacturer : Lindarets
Material : SAE 420 stainless steel
Material1 : Aluminum
Material2 : Nylon
ModelName : 2405OILTOOL01
ModelNumber : TL-TA-Hx-6.8.16
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : Mechanical
PartNumber : TL-TA-Hx-6.8.16
Pattern : 3 IN 1
PowerSourceType : NO
ProductDescription :
About
Every once in a while we find ourselves on the trail or away from home needing a tool that's really, really hard to fake. Say, for example, the 16mm hex key needed for the self-extraction caps on RaceFace and Easton Cinch cranks.
And that's precisely what this is for.
It works with a 12mm thru axle (not included) and fixes a problem that doesn't come about often but can ruin your day if it does. Consider it part of your extended travel tool kit and toss it in your 'big day' bag, flight case, or the tool wrap that lives in your trunk.
We added deep 6mm and 8mm hexes to the tool to easily tighten external-bearing cranks. Those are common pedal hex sizes too, which makes reassembling a bike in a foreign hotel that much easier than with a pocket-sized tool (pedals should be tightened to 36-40Nm).
Important Notes
- 40Nm Max torque.
How much is that? It's as if you were hanging 25lb of stuff from the handle, 110mm from the center of the tool (roughly the middle of your hand at the end of a rear thru axle). Any more and you're going to want a beefier handle. - Some fittings, especially 16mm self-extracting lockrings, are awfully shallow. Take care to ensure full engagement and avoid stripping.
- Use only with 12mm thru axles with a 3mm (1/8in) or thicker wall (6mm max thru hole).
Common sense is your friend: super-light parts don't like to be used as handles, but those with a 3mm wall (3-3.5mm is common) will give you a good margin of safety when the maximum torque value is observed. - This is a hand tool: Don't use a cheater bar, hammer, foot, rock or anything else that isn't your hand to apply force.
- If you overdo it and bend your axle, don't put it back in your bike!
ProductSiteLaunchDate : 2021-04-15T07:00:00.000Z
Size : One Size
Style : O-ring
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700