Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : FUTTFUTTFU
BulletPoint : Interference-resistant Measurement， 5KHz Square Wave Output，550V Voltage Tolerance Protection，Auto-ranging
BulletPoint1 : The KTQ-II adjustable fabricator is suitable for the study of accurate evaluation of thin film thickness. By adjusting the two differentiators above the fabricator, it can adjust the scraper below to control the gap, that is, the final coating thickness.
BulletPoint2 : The operator sets the blade clearance by adjusting the micrometers and sets up film width to be coated by adjusting blade width. This is an excellent tool to make the quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at the lower cost.
BulletPoint3 : aluminium alloy knife blade with precision ground edge.;Micrometer head's controllable accuracy is 10 microns.
BulletPoint4 : Major Manufacturing Material: Aluminum Alloy.；Scratch Effective Width: 55/100/150/200mm.;Film thickness range: 0 ~ 3500μm.;Accuracy: ±2 micron.
BulletPoint5 : Widely used in: printing, paint, paint, cosmetics, drugs, adhesives, batteries and other scientific research industries.
BulletPoint6 : We can set the display interface as rejection rate, transmittance or light transmission;
BulletPoint7 : Lock testing datas by pressing "Hold" button.
Color : White
ExternallyAssignedProductIdentifier : 4291199937567
ExternallyAssignedProductIdentifier1 : 0029082306923
ExternallyAssignedProductIdentifier2 : 029082306923
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat11 : CN_SmallLithiumIonBatteryWithEquipment
Hazmat12 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat13 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat14 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat15 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat16 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat17 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat18 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat19 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat21 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat22 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat23 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat24 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat25 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat26 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat28 : IE_SmallLithiumIonBatteryWithEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : US_SmallLithiumIonBatteryWithEquipment
Hazmat6 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat7 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat8 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat9 : JP_SmallLithiumIonBatteryWithEquipment
IncludedComponents : Adjustable Film Coating Applicator
ItemName : Effective coating width 250mm Adjustable Film Coating Applicator Film Coater with Micrometer Wet Film Preparation Device 0-3500μm (film casting doctor blade)
ItemPackageDimensions_Height : 27.2 centimeters
ItemPackageDimensions_Length : 17.6 centimeters
ItemPackageDimensions_Width : 20.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : multi-testers
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : FUTTFUTTFU
Material : aluminium alloy
MaximumOperatingVoltage : 4.5 volts_of_direct_current
MeasurementAccuracy : ±2%
MeasurementType : Multimeter
MinimumOperatingVoltage : 0.8 volts_of_alternating_current
ModelName : Adjustable Film Coating Applicator
ModelNumber : Adjustable Film Coating Applicator
NumberOfItems : 1
NumberOfLithiumIonCells : 1
NumberOfLithiumMetalCells : 1
PackageLevel : unit
PartNumber : SGNUSE23782-2
PowerSourceType : Adjustable Film Coating Applicator
ProductDescription :
Usage method:

1. Place the coater on a completely flat test surface and adjust the clearance required by the scraper to twice the thickness of the required wet film.

2. In the front section of the coated knife, a small amount of test samples are poured between the end plates, and the instrument is moved on the surface at a slow and uniform speed of about 1-2 cm per second until the liquid has been fully coated and/or any remaining liquid has been removed from the end of the coated path.

3. The exact ratio of wet film thickness to any clearance of the coated knife depends on the material used, the viscosity and texture of the liquid, the pressure applied on the coated knife, the speed of the coated film and the geometric shape of the edge of the coated film.

4. The actual wet film should be measured by a wet film thickness gauge, and the gap should be adjusted until the required wet film thickness is reached.

Maintenance and maintenance:

1. Clean the instrument with appropriate solvents immediately after each use.

2. Both ends of the scraper move in the groove. The groove must be kept free of sample material at all times.

3. Differential heads may occasionally need to be repositioned. To correct wear or dislocation, components must be lowered or raised, which can be achieved by loosening (and removing) two hidden fixed screws on each differentiator.
ProductSiteLaunchDate : 2024-09-21T07:00:00.000Z
Size : 250
SpecificationMet1 : CE
SpecificationMet2 : RoHS
SpecificationMet3 : UL
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41110000
UpperTemperatureRating : 50 degrees_celsius
Wattage : 5 watts