Cart 2 india

Specification
Brand : YUCHENGTECH
BulletPoint1 : 1.【Working principle】: the lubricant is poured into the container of the oil injection cup, when the needle valve switch is opened, the needle valve moves upward, so that the oil injection pipe is connected with the inside of the oil cup, the lubricant, under the action of gravity, drips from the oil injection pipe through the annular gap of the needle valve to the parts that need to be lubricated. And can be adjusted through the needle valve switch, you can change the position of the needle valve, so as to adjust the size of the annular gap, and then control the amount of oil dripping how much.
BulletPoint2 : 2.【Advantages】: Able to accurately control the dripping speed and amount of lubricating oil according to the lubrication requirements of the equipment; The design of the transparent oil cup and observation hole allows the staff to intuitively observe the oil level in the cup and the dripping speed of the oil injection pipe, facilitating timely understanding of the lubrication status of the equipment and making adjustments as needed High quality sealing materials ensure that there will be no leakage or wear during use, and can adapt to various working environments.
BulletPoint3 : 3.【Structural features】: mainly composed of transparent oil cup, cover, oil injection tube, needle valve, needle valve switch, observation hole and other components. Transparent oil cup is used to store lubricating oil for easy observation of oil level; Cover can prevent dust and other impurities from entering the oil cup; Oil injection pipe is used to deliver lubricating oil to the lubrication area; The needle valve adjusts the amount of oil dripping by controlling the size of the annular gap; The needle valve switch is used to operate the opening and closing of the needle valve; The observation hole facilitates the staff to check the oil dripping speed.
BulletPoint4 : 4.【Attention】: When pouring lubricating oil, be careful not to exceed the capacity mark of the oil filling cup. During the oil filling process, maintain the pressure of the handle to ensure stable injection of lubricating oil. After the oil filling is completed, release the handle and close the valve. After each use, clean the inside of the oil filling cup in a timely manner, regularly check the use of valves and seals. If not in use for a long time, empty the lubricating oil and keep it dry.
BulletPoint5 : 5.【Wide applicability】: It can be used for lubrication of various equipment and mechanical components that require oil dripping, such as machine tool guides, gears, chains, etc., industrial equipment, machine tools, automation equipment, general mechanical components, etc. It can also be applied to the lubrication of small mechanical equipment, tools, instruments, etc., such as electric tools, printing machinery, textile machinery, etc., which require regular oil dripping lubrication.
Capacity : 50 milliliters
Color : Yellow
ConnectorType : Threaded
ContainsLiquidContents : 1
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 781593229473
ExternallyAssignedProductIdentifier2 : 0781593229473
GpsrSafetyAttestation : 1
IncludedComponents : Needle Valve
ItemDisplayWeight : 0.1 pounds
ItemForm : Grease
ItemName : YUCHENGTECH 1/8" PT Sight Gravity Drip Feed Oiler Thread Needle Valve Type Oil Cup Drip Oiler (50ml)
ItemPackageDimensions_Height : 13.208 centimeters
ItemPackageDimensions_Length : 8.7122 centimeters
ItemPackageDimensions_Width : 9.4996 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-needle-valves
LiquidVolume : 0.118 liters
Manufacturer : YUCHENGTECH
Material : Brass
MaximumOperatingPressure : 600 pounds_per_square_inch
ModelName : Needle Valve
ModelNumber : YUCHENG733
NumberOfItems : 2
NumberOfPorts : 2
PartNumber : YUCHENG733
ProductDescription : Advantages:
1. Adjustable oil injection: according to the lubrication demand of the equipment, it can accurately control the dripping speed and oil injection volume of the lubricant, which effectively avoids the waste of lubricant and excessive lubrication problems.
2. Convenient observation: transparent oil cup and observation hole design, so that the staff can intuitively observe the oil level in the oil cup and oil injection tube drip rate, easy to understand the lubrication status of the equipment in a timely manner, and adjusted according to need.
3. Good sealing: Needle valve oil cup adopts high-quality sealing materials to ensure that there will be no leakage in the process of use.
4. Strong durability: needle-valve oiling cup is made of high-strength materials, with wear-resistant and other characteristics, can adapt to a variety of harsh working environments.
5. Convenient installation: needle valve oiling cup has a simple structure, quick installation, and can be used with a variety of mechanical equipment.

Precautions:
1. Fill the lubricant: open the oil-filling cup and pour the suitable lubricant into the container of the oil-filling cup, taking care not to exceed the capacity mark of the oil-filling cup.
2. Install the oil filling cup: connect the connection port of the oil filling cup with the lubrication port of the equipment firmly, and fix the oil filling cup on the equipment to prevent shaking.
3. Use the oil injection cup: open the valve, press the handle, slowly inject the lubricant into the equipment, the oil injection process to maintain the pressure of the handle to ensure
that the lubricant is injected stably, after the completion of the oil injection to release the handle, close the valve.
4. Cleaning and maintenance: after each use, the oil cup should be cleaned in a timely manner, regularly check the use of valves and seals, long time no use, the need to empty the lubricant, keep dry.

Parameters:
Material: Brass,Plastic
Thread:1/8" PT Thread
Capacity:50ml
Installation method: external thread connection

ProductSiteLaunchDate : 2017-08-24T00:00:00.000Z
RecommendedUsesForProduct : Grease
Size : 50ml
SpecificationMet : ASME, ASTM, NSF, ULC, EN 10204
SpecificationMet1 : MSS SP 80
SpecificationMet2 : ASTM
SpecificationMet3 : ISO 9001
SpecificUsesForProduct : Party
Style : M x F
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Needle Valve