Cart 2 india

Specification
Brand : Koyo
BulletPoint1 : Thrust washer for use with Koyo Torrington NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways
BulletPoint2 : Through-hardened chromium steel for durability and resistance to deformity under heavy loads
BulletPoint3 : Flush-ground raceways for higher speeds and greater running accuracy than unground raceways
BulletPoint4 : Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
BulletPoint5 : Meets ANSI/ABMA standard 21.2 for quality assurance
Color : Silver
ExternallyAssignedProductIdentifier1 : 605790205934
ExternallyAssignedProductIdentifier2 : 0605790205934
ExternallyAssignedProductIdentifier3 : 00605790205361
IncludedComponents : Drawn Cup Needle Roller Bearings
ItemName : Koyo TRA-1018 Thrust Roller Bearing Washer, TR Type, Open, Inch, 5/8" ID, 1-1/8" OD, 1/32" Width
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : Koyo Torrington
Material : Steel
ModelNumber : NTA-613
NumberOfItems : 1
PartNumber : TRA-1018
ProductDescription :

Specification:

•     Model: HK0608
•     Drawn Cup Material: ST14 Steel
•     Cage Material: ST13 Steel
•     Needle Roller Material: Chromium Steel (GCr15)
•     Bore Diameter (Fw): 6mm
•     Outside Diameter (D): 10mm
•     Width: 8mm
•     Static Load Capacity (Cor): 1550N
•     Dynamic Load Capacity (Cr): 1830N
•     Maximum Rotational Speed (Oil): 32000rpm
•     Number of Packs: 10 Pcs

Description:

•     Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
•     These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
•     Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
•     For various applications such as planetary gears in automobiles, constant mesh gearboxes, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

    NOTE: 

• Install with a press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

ProductSiteLaunchDate : 2011-12-12T00:00:01-00:00
Size : 6mm x 10mm x 8mm
SpecificationMet : Iso
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500