Cart 2 india

Specification
Brand : MFQJJRRMI
BulletPoint : bearing
BulletPoint1 : Bearings
BulletPoint2 : Item: CSK20; Type: One Way Bearing Clutches; Note: Without Keyway
BulletPoint3 : Inside Diameter: 20 mm; Outside Diameter: 47 mm; length: 14 mm
BulletPoint4 : Quantity: 1 Bearing; Torque Capacity: 20*47*14mm
BulletPoint5 : Surface Roughness: Ra 0.05; Structure: ONE WAY
BulletPoint6 : Material: STEEL; Coatings: Ant-Rust Oil
Color : One Color
ExternallyAssignedProductIdentifier : 6089486248926
ItemName : MFQJJRRMI Needle Roller Bearings CSK20 1 PC One Way Bearing Clutches Without Keyway 20X47X14mm Steel Ant-Rust Oil CKK20 CSK6204 Free Wheel Clutch Bearings CSK204 Bearings
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : MFQJJRRMI
ModelNumber : MFQJJRRMI
NumberOfItems : 1
PartNumber : MFQJJRRMI
ProductDescription : Bearings
High precision fast speed long life.
CSK ONE WAY BEARING CLUTCHES
CSK
Type CSK is a sprag type clutch integrated into a 62 Series ball bearing (except sizes 8 and 40). It is bearing supported shipped grease lubricated and protected against dust larger than .012" (.3mm) diameter. The use of additional "nylon" type seals is recommended especially when the working temperature exceeds 122°F (50°C).
Oil bath lubrication is also possible if the original grease is first flushed out using a suitable solvent.
Torque transmission is ensured by a press fit assembly into a rigid outer housing with N6 tolerance and onto a shaft with n6 tolerance. The initial bearing radial clearance is set at C5 and is reduced if using the press fit as specified.
One race may be glued. If both races are to be glued performance will be reduced or a C3 bearing clearance will be necessary.
Operating temperature range: 21 to 140°F (-6 to 60°C). Special grease available for operating temperatures: -40 to 212°F (-40 to 100°C).
CSK..2RS
CSK..2RS clutches are .197" (5mm) wider than a standard 62 Series bearing as they are equipped with lip seals for wash down applications.
CSK..P
CSK..P has the same construction and outside dimensions as type CSK but has a keyway on the inner race. These clutches can be mounted on a shaft to k6 tolerance. The outer race must be pressed into a rigid housing to N6 tolerance.
CSK..PP
CSK..PP features a keyway on both the inner and outer race. The recommended mounting tolerances are k6 on the shaft and K6 in a rigid housing. An h6 tolerance on the shaft or H6 in the housing are also acceptable for a light press fit assembly.
Operating temperature range: 21 to 140°F (-6 to 60°C). Special grease available for operating temperatures: -40 to 212°F (-40 to 100°C).
ProductSiteLaunchDate : 2025-04-18T08:55:41.795Z
Size : One Size
UnitCount : 1