Cart 2 india

Specification
Brand : Othmro
BulletPoint1 : Model: HK0608 (Bore Dia. (Fw)= 6mm, Outer Dia. (D)a= 10mm, Width (C)= 8mm)
BulletPoint2 : ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Roller
BulletPoint3 : Good heat tolerance, high load carrying capacity and stiffness
BulletPoint4 : Low cross section, enable downsizing and suit for use in restricted mounting spaces
BulletPoint5 : Pre-Lubricated. Good running properties
Color : HK0608
ExternallyAssignedProductIdentifier1 : 0604267556593
ExternallyAssignedProductIdentifier2 : 604267556593
IncludedComponents : Needle Roller Bearings
ItemName : Othmro 2Pcs Needle Roller Bearings Two Way Bearing Needle Roller Bearing Needle Bearings Bearing Steel Industrial Needle Bearings High Load Carrying Capacity (6×10×8mm, 5)
ItemPackageDimensions_Height : 10.3 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : Othmro
Material : Steel
ModelNumber : OTH190822Z-1734
NumberOfItems : 5
PartNumber : OTH190822Z-1734
ProductDescription : 1.Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
2.These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
3.Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
4.For various applications such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
5.NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.
Specification:
Model: HK0608
Drawn Cup Meterial: ST14 Steel
Cage Meterial: ST13 Steel
Needle Roller Meterial: Chromium Steel (GCr15)
Bore Diameter (Fw): 6mm
Outside Diameter (D): 10mm
Width: 8mm
Static Load Capacity (Cor): 1.55kN
Dynamic Load Capacity (Cr): 1.83kN
Maximum Rotational Speed (Oil): 32000rpm
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-10-18T05:48:36.314Z
Size : 6×10×8mm
SupplierDeclaredDgHzRegulation : not_applicable