Cart 2 india

Specification
Brand : Sunydog
BulletPoint1 : Wide 6-16V operating input .
BulletPoint2 : 20X the power, improving the link quality and coverage of certified WLAN devices.
BulletPoint3 : Simply plug and play, no software is required.
BulletPoint4 : 2.5dB ultra-low noise.
BulletPoint5 : Working with certified IEEE 802.11b/g/n wireless LAN devices.
BulletPoint6 : Frequency Range: 698-6000MHz; Gain: 5dBi; Direction: Omni-directional; Impedance: 50 ohm; Waterproof: Rainning Proof; Feature: Fixed Wall Mount; Cable Length: 3m/10 feet RG174 Cable; Antenna Cable Connector: SMA Male;
Color : 4 Lead MIMO
CompatibleDevices : Router
ConnectorType : coaxial
FrequencyBandsSupported : 2.4-2.5GHz
Impedance : 50 ohm
IncludedComponents1 : Instruction manual
IncludedComponents2 : Power adapter
ItemName : Sunydog 4W 4000mW 802.11b/g/n WiFi Wireless Amplifier Router 2.4Ghz WLAN ZigBee BT Signal Booster with Antenna TDD
ItemPackageDimensions_Height : 21.9 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 13.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : network-antennas
Manufacturer : Sunydog
MaximumRange : 100 feet
ModelNumber : Sunydog FBMRICHC2082BXUSMF
NumberOfChannels : 4
NumberOfItems : 1
PartNumber : Sunydog FBMRICHC2082BXUSMF
PowerSourceType : Corded Electric
ProductDescription : with time-division duplexing(TDD) method of WLAN and using rapid micro detection technology to provide high linearity amplification. The signal booster can work with most WLAN/WiFi devices, BT, ZigBee and increase the signal strength, therefore a larger WLAN coverage and more stable transmission rate.

Specifications:
Frequency : 2.4-2.5GHz
Operating voltage: 6-16V
Receiving gain: 10dB±1
Transmission gain: 13dB±1
Input trigger power: 3dBm(min), 20dBm(max)
Max output power(P1dB): 36dBm(4W)
EVM: 3％@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC supply t: 435mA @ Pout 28dBm 9V
Noise figure: ＜2.5dB
TX/RX switch time delay: ＜1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40℃~70℃
Operating humility: Up to 95％ rel. humidity
Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)
Item weight: 181g / 6.39oz
Package size: 21 * 12.5 * 5cm / 8.26 * 4.92 * 1.96in (L * W * H)
Package weight: 381g / 13.43oz

Applications:
Wireless LAN 802.11b/g/n access point clients.
Based on the 2.4GHz WLAN wireless base stations.
Based on the 2.4GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, BT protocol wireless devices.

Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.

Package List:
1 * 4W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi antenna
1 * User manual (English)
ProductSiteLaunchDate : 2023-11-10T10:04:55.557Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43222600
WarrantyDescription : 2
WirelessCommStandard : 802_11_BGN