Cart 2 india

Specification
Brand : ZDE
BulletPoint1 : This expansion board adds one 2.5G network port and one M.2 Key-M interface for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
BulletPoint2 : Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet and M.2 Key-M NVME.
BulletPoint3 : After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
BulletPoint4 : Support M.2 NVMe SSD for expansion and storage, compatible with M.2 KEY-M NVMe SSD in 2230/2242/2260/2280 length. Support boot from SSD, and it needs Raspberry Pi official firmware, which is at least 2024.5.13.
BulletPoint5 : With four M2.5 fixing holes, the concave design on the top of the board is convenient for the operation and use of 40Pin GPIO.
CompatibleDevices : Raspberry Pi 5 (8GB), Raspberry Pi 5 (4GB)
ConnectivityTechnology : Ethernet 2.5G
ItemName : ZDE ZP593 PCIe to 2.5G Ethernet Network Port PCIe to M.2 Key M NVMe SSD HAT Adapter Expansion Board for Raspberry Pi 5 Support M.2 NVMe 2230 2242 2260 2280 SSD
ItemPackageDimensions_Height : 1.5 centimeters
ItemPackageDimensions_Length : 8.6 centimeters
ItemPackageDimensions_Width : 5.6 centimeters
ItemTypeKeyword : computer-internal-network-cards
Manufacturer : ZDE
ModelName : ZP593
OperatingSystem : Raspberry Pi OS
ProductSiteLaunchDate : 2025-01-16T19:58:37.792Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43201500