Specification Brand : QSFPTEK BulletPoint1 : ★Data Rate: 10Gb SFP+ to RJ45 ethernet copper module supports 10 gigabit over Cat 6a/7/8 cable, up to 30 meters. Supprots 5Gb/2.5Gb rate over Cat 5e cable or better,up to 50 meters. NOTES: NOT Supprots 1000M BulletPoint2 : ★Compatibility: For Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Meraki, MikroTik, TL-SM5310-T, Netgear AXM765, Broadcom, QNAP, Edge-core, EMC, F5, Norkia, QTC with 100+ vendors switch with 10G SFP+ port. BulletPoint3 : ★Easy to Install: Plug and play. Low power consumption ≤2.5w, Interface: RJ-45; Cable type: Cat6/6a. Hot Pluggable SFP+ MSA compliant, instantly use without any configuration, operating temperature range: 0℃ to 70℃. BulletPoint4 : ★Multi Rate SFP+: Supports to 2.5G/5G/10Gbps transceiver support 10Gbase-R on host port, support 10Gbase-T/5Gbase-T/2.5Gbase-T on line port. BulletPoint5 : ★Wide Application: RoHS compliant and lead-free. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments. Color : For Cisco ExternallyAssignedProductIdentifier1 : 717205980470 ExternallyAssignedProductIdentifier2 : 0717205980470 FrequencyBandClass : dual_band ItemName : 10GBASE-T SFP+ to RJ45, 10gagbit SFP Copper RJ-45, 10gbe SFP Module with RTL8261N Chip, Mini Gbic Network Transceiver Compatible with Cisco SFP-10G-T-S, Ubiquiti, and Other Open Switch ItemPackageDimensions_Height : 10 centimeters ItemPackageDimensions_Length : 1.8 centimeters ItemPackageDimensions_Width : 4.8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : network-transceivers Manufacturer : QSFPTEK ModelNumber : QT-RTL-SFP+-T-CO NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : QT-RTL-SFP+-T-CO ProductDescription : 10gbe sfp+ to rj45 copper module is equipped with RJ45 connectors that is compatible with Cat6/Cat6a Ethernet copper cables and transmit 30m at 10GBASE-T data rates. In addition, the 10 Gbps SFP RJ-45 module is backward intermediate rate 2.5GBASE-T, 5GBASE-T, providing multi-gigabit Ethernet deployment. QSFPTEK manufactured 10GBASE-T SFP+ module is compliant with IEEE 802.3an, IEEE 802.3az, and SFP+ MSA. The 10G RJ45 module uses the electrical signal to transmit data, allowing an upgrade to 10G by reusing existing copper cabling. This 10G SFP+ RJ45 copper transceiver caters to 10 Gigabit Ethernet (10GbE) copper connections, delivering a cost-effective NBASE-T copper solution. It has been tested on host devices to ensure full compatibility with 10G-T ports on brand equipment, such as 10GBASE-T switches, enterprise routers, and server network interface cards (NICs). ProductSiteLaunchDate : 2024-05-14T03:16:06.969Z SpecificUsesForProduct : Personal SupplierDeclaredDgHzRegulation : not_applicable UnspscCode : 43201553 WarrantyDescription : One year