Cart 2 india

Specification
Brand : 6COM
BulletPoint1 : 5 Meter 10G SFP+ DAC Cable - 24AWG, SFP+ to SFP+, 2-pair differential twinax cable, Passive, applicable to 10G SFP+ port, not for Gigabit SFP port.
BulletPoint2 : Widely Compatibility - for Cisco, Ubiquiti, D-Link, Supermicro, Netgear, and other Open Switches, up to 10Gb/s data transmission.
BulletPoint3 : Application - Using with switch, router, server, NIC, or fiber optic equipments with SFP+ port for storage area network and high performance computing.
BulletPoint4 : Quality Assurance - each DAC cable is tested, please contact us, any quality and compatibility issues for the cable.
BulletPoint5 : After-sales Service - 30-day free return, 3-year warranty, lifetime technology support. 6COM is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us.
Color : 5-Meter(16.4ft)
CompatibleDevices : Fortinet
CompatibleDevices1 : Router
CompatibleDevices2 : Server
ConnectorGender : Male-to-Male
ConnectorType : RJ45
CustomerPackageType : Standard Packaging
DataTransferRate : 10 gigabits_per_second
EthernetCableCategory : cat_6a
ExternallyAssignedProductIdentifier1 : 742089353874
ExternallyAssignedProductIdentifier2 : 0742089353874
Frequency : 10000000000 hertz
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : 6COM 10G SFP+ DAC Cable, 5 M (16.4ft) Passive Twinax Cable, Direct Attach Copper, 10GBase-CU Cable, SFP to SFP, for Cisco, Ubiquiti, D-Link, Supermicro, Netgear and Open Switches, 5 Meter
ItemPackageDimensions_Height : 31.3944 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 30.4038 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : network-transceivers
Manufacturer : 6COM
Material : Copper
ModelNumber : 6COM-SFP+-CA-P5M
NumberOfItems : 1
NumberOfPins : 12
PartNumber : 6COM-SFP+-CA-P5M
ProductDescription : Cost-Effective Fiber Alternative
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ directly attached Twinax cable assemblies support 10 Gigabit Ethernet, 10 Fibre Channel, and other industry standards. This copper cable provides a cost-effective alternative to purchasing expensive fiber optic transceivers and cables for distances up to 7 meters.

10G SFP+ DAC Twinax Cable for Cisco, Ubiquiti, D-Link, Supermicro, Netgear, other Open Switches.
Connector Type: SFP+ to SFP+
Max Data Rate: 10Gbps
Minimum Bend Radius: 23mm
Wire AWG: 30AWG
Cable Length: 5m (16.4ft)
Jacket Material: PVC (OFNR)
Temperature: 0 to 70°C (32 to 158°F)
Protocols: 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel

Install a 10G DAC Cable:

A. Install SFP+ Modules
1. Remove the protective ESD cap from the connector.
2. Slide the SFP+ cable end into the slot until it locks into position(There is an audible click when the connector is properly seated.)
B. Remove SFP+ Modules
1. Pull on the SFP+ latch pull lanyard.
2. Grasp the SFP+ connector on both sides and remove it from the system.
3. If possible, replace the ESD protective cap or put the SFP+ into an ESD protected bag.

Safety Information
Notice:
1. The cables can only be installed or replaced by qualified personnel.
2. Please wear antistatic gloves.
3. Caution against moisture.
4. Do not disassemble or modify the cables.

Warning:
Don't approach or look the optical fiber exit with naked eyes directly. Excessive bending is strictly prohibited.

ProductSiteLaunchDate : 2020-05-22T02:30:05.203Z
RecommendedUsesForProduct : Connecting network devices within data centers or server racks
Size : 5-Meter(16.4ft)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43202222