Cart 2 india

Specification
Brand : Finisar
BulletPoint1 : Finisar FTLX8574D3BCV 10GBASE-SR / 1000BASE-SX SFP+ Transceiver
BulletPoint2 : Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s
BulletPoint3 : Maximum link length of 400m on OM4 MMF,
BulletPoint4 : Uncooled 850nm VCSEL laser, Duplex LC connector
BulletPoint5 : BRAND NEW
Color : Gray
ConnectivityTechnology : Ethernet
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7426801875846
ExternallyAssignedProductIdentifier1 : 650361456437
ExternallyAssignedProductIdentifier2 : 0650361456437
ExternallyAssignedProductIdentifier3 : 00821455178058
FrequencyBandClass : dual_band
GpsrSafetyAttestation : 1
IncludedComponents : Converter
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 3 inches
ItemDisplayDimensions_Width : 1 inches
ItemName : Finisar SFP+ Module - For Optical Network, Data Networking - 1 LC Duplex 10GBase-SR/SW Network - Optical Fiber Multi-mode - 10 Gigabit Ethernet, Gigabit Ethernet - 10GBase-SR/SW, 1000Base-SX - Hot-plu
ItemPackageDimensions_Height : 11.85 millimeters
ItemPackageDimensions_Length : 14.8 millimeters
ItemPackageDimensions_Width : 56.5 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : network-transceivers
Manufacturer : Finisar Corporation
Material : Metal
ModelNumber : FTLX8574D3BCV
NationalStockNumber : 7035-01-619-9682
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : FTLX8574D3BCV
ProductDescription : Finisar #39; #39;s FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer #39; #39;s recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.
ProductSiteLaunchDate : 2016-02-08T06:14:04.204Z
Size : 1000Base-LX: 10km
SpecificUsesForProduct : personal
StreetDate : 2019-05-16T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43220000
WarrantyDescription : Limited Warranty