Cart 2 india

Specification
Brand : Jeirdus
BulletPoint1 : 100% Compatible for HP 10GBASE-T.
BulletPoint2 : 10GBASE-T SFP+ transceiver module for CAT6A/CAT7 cable, copper, RJ-45 connector.
BulletPoint3 : RJ-45 Transceiver, 10Gb/s Copper SFP, 10GBase-T SFP+, RJ45 SFP+, 30-Meter. Supports 100/1000Base-T using Cat 5e cable or better.
BulletPoint4 : 100% Compatible on HP equipment. Each transceiver is individually tested on Orignal Brand switches and we will make sure 100% compatible before delivery.
BulletPoint5 : High Quality Chip: Fast Transmission, Stable and Reliable.3-year Warranty, 30 Days Free-returned, Free Lifelong Technology Support.
Color : 10GBase-T: 30m
CompatibleDevices : Fortinet
CompatibleDevices1 : Router
CompatibleDevices2 : Server
ConnectorGender : Male-to-Male
ConnectorType : RJ45
CustomerPackageType : Standard Packaging
DataTransferRate : 10 gigabits_per_second
EthernetCableCategory : cat_6a
ExternallyAssignedProductIdentifier1 : 650985201239
ExternallyAssignedProductIdentifier2 : 0650985201239
Frequency : 10000000000 hertz
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemDisplayDimensions_Length : 1 centimeters
ItemName : Jeirdus for HP Compatible 10GBase-T SFP+ Module 10 Gigabit RJ45 Copper Transceiver 30-Meter
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : network-transceivers
Manufacturer : Jeirdus
Material : Copper
ModelNumber : FBM-SFP+T-HP
NumberOfItems : 1
NumberOfPins : 12
PartNumber : FBM-SFP+T-HP
ProductDescription : Cost-Effective Fiber Alternative
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ directly attached Twinax cable assemblies support 10 Gigabit Ethernet, 10 Fibre Channel, and other industry standards. This copper cable provides a cost-effective alternative to purchasing expensive fiber optic transceivers and cables for distances up to 7 meters.

10G SFP+ DAC Twinax Cable for Cisco, Ubiquiti, D-Link, Supermicro, Netgear, other Open Switches.
Connector Type: SFP+ to SFP+
Max Data Rate: 10Gbps
Minimum Bend Radius: 23mm
Wire AWG: 30AWG
Cable Length: 5m (16.4ft)
Jacket Material: PVC (OFNR)
Temperature: 0 to 70°C (32 to 158°F)
Protocols: 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel

Install a 10G DAC Cable:

A. Install SFP+ Modules
1. Remove the protective ESD cap from the connector.
2. Slide the SFP+ cable end into the slot until it locks into position(There is an audible click when the connector is properly seated.)
B. Remove SFP+ Modules
1. Pull on the SFP+ latch pull lanyard.
2. Grasp the SFP+ connector on both sides and remove it from the system.
3. If possible, replace the ESD protective cap or put the SFP+ into an ESD protected bag.

Safety Information
Notice:
1. The cables can only be installed or replaced by qualified personnel.
2. Please wear antistatic gloves.
3. Caution against moisture.
4. Do not disassemble or modify the cables.

Warning:
Don't approach or look the optical fiber exit with naked eyes directly. Excessive bending is strictly prohibited.

ProductSiteLaunchDate : 2018-07-01T00:00:00.000-07:00
RecommendedUsesForProduct : Connecting network devices within data centers or server racks
Size : For HPE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43200000