Cart 2 india

Specification
AgeRangeDescription : adult
Brand : LOTOAK
BulletPoint1 : Longer service life can be used for home repair, is the ideal DIY hand tool
BulletPoint2 : 1 It is especially important to cut the aluminum plate at the blade edge.
BulletPoint3 : 2 Open the drill first, then cut it. At the end, first exit and then turn off the drill.
BulletPoint4 : 3 The cutting edge of the shank must be perpendicular to the workpiece to be cut during cutting to prevent the shank from breaking.
BulletPoint5 : 4 Tool bar replacement: Open the cover, take out the anti-loose nut, loosen the set screw, pull out the tool bar with pliers, reinstall the knife bar, and tighten the screw.
Color : One Color
ExternallyAssignedProductIdentifier : 4999633806287
ExternallyAssignedProductIdentifier1 : 0769902967766
ExternallyAssignedProductIdentifier2 : 769902967766
IncludedComponents : Sheet
ItemName : LOTOAK 160A Double- Head Metal Sheet Cutter Cutting Machine Cutting Saw Iron Cutting Electric Punching
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-nibblers
Manufacturer : LOTOAK
Material : Metal
Material1 : Plastic
Material2 : Stainless Steel
Material3 : Metal
Material4 : Fiberglass
Material5 : Aluminum
Material6 : Alloy Steel
Material7 : Copper
ModelName : LOTOAK
ModelNumber : LOTOAK
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : LOTOAK
PowerSourceType : hand_powered
ProductDescription : 1 It is especially important to cut the aluminum plate at the blade edge.
2 Open the drill first, then cut it. At the end, first exit and then turn off the drill.
3 The cutting edge of the shank must be perpendicular to the workpiece to be cut during cutting to prevent the shank from breaking.
4 Tool bar replacement: Open the cover, take out the anti-loose nut, loosen the set screw, pull out the tool bar with pliers, reinstall the knife bar, and tighten the screw.
5 Tool holder replacement: Unscrew the compression cap counterclockwise and replace it with a new one.

Sheet opener instructions:
1 When using the thin plate hole opener, first insert the drill front end and the cutter into the round hole of the hole opener, connect the cutter to the electric drill and lock it tightly, then put the three branches on the shelf and the stud screws tightly. In order to prevent the hole opener from sliding; insert the left and right positioning pins upwards into the small square hole of the shelf, and finally adjust and tighten the tight screw according to the size of the arc to be cut, and fix the ruler firmly. To ensure the accuracy of cutting round holes.
2 When cutting the standard arc, the thin-plate hole opener should be used to ensure the smooth and beautiful circular cut surface. It should also drill a 3 mm positioning eye first, and then drill a 12 mm hole to insert the cutter head into the hole. The inner and outer circles are cut inside.
Technical Parameters:
1, there are two cutter heads adjustable head cutting
2, the cutter head can be positioned 360 degrees in any direction
3, optional 8mm electric or pneumatic drill, speed 1500-3000 rev / min
4, the minimum cutting radius of 12mm
5, allow cutting thickness
Ordinary iron plate: 1.8mm
Stainless steel plate: 1.2mm
Copper, aluminum plate: 2mm
Plastic plywood car: 2mm
Blow molding
ProductSiteLaunchDate : 2023-11-28T12:07:53.720Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700