Cart 2 india

Specification
Brand : ENDEAVORING
BulletPoint : Price For: Each Nozzle Spray Angle: 90A Item: Hollow Cone Nozzle GPH: 1.75 Country of Origin (subject to change): United States
BulletPoint1 : Monarch ASP50 0.50 GPH Stainless Steel Siphon Nozzle With Brass Stem
BulletPoint2 : Note: Capacities are based on rating conditions of 4 inch lift height and 4 PSIG air pressure using No. 2 Fuel Oil (34‐36 SSU Viscosity at 100° F). Capacity and spray characteristics will vary with changing air pressures (or flow) and lift heights.
BulletPoint3 : Materials: Tip: Stainless Steel Disc: Stainless Steel Locknut: Brass O-Ring: BUNA N
BulletPoint4 : Features: Produces a solid cone spray pattern with extremely fine droplet size Low air pressures and CFM required for operation Internal nozzle passages are large and the nozzle produces very low flow rates without risk of clogging. No filter is required. Turndown ratio in the range of 3.5:1 over a pressure range of 2 – 10 PSI can be achieved.
BulletPoint5 : Replaces Hago SN609-5, 030L2154 And Delaven 30609-5
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier : 7440139391205
ItemName : Monarch ASP-50 0.50 GPH Stainless Steel Siphon Nozzle with Brass Stem. Replaces Hago SN609-5, 030L2154 and Delaven 30609-5
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : watering-nozzles
Manufacturer : Endeavoring
Material : Stainless Steel
Material1 : Metal
Material2 : Plastic
ModelNumber : ASP-50
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : ASP50
ProductDescription : Monarch ASP50 0.50 GPH Stainless Steel Siphon Nozzle With Brass Stem Note: Capacities are based on rating conditions of 4 inch lift height and 4 PSIG air pressure using No. 2 Fuel Oil (34‐36 SSU Viscosity at 100° F). Capacity and spray characteristics will vary with changing air pressures (or flow) and lift heights. Materials: Tip: Stainless Steel Disc: Stainless Steel Locknut: Brass O-Ring: BUNA N The ASP Aspirator / Siphon Nozzle is an air operated nozzle which produces an extremely fine, fog like atomization. The Nozzle requires no pump for oil pressure since the air pressure creates a suction in the oil line which draws the oil into the nozzle. Features: Produces a solid cone spray pattern with extremely fine droplet size Low air pressures and CFM required for operation Internal nozzle passages are large and the nozzle produces very low flow rates without risk of clogging. No filter is required. Turndown ratio in the range of 3.5:1 over a pressure range of 2 – 10 PSI can be achieved. Replaces Hago SN609-5, 030L2154 And Delaven 30609-5
ProductSiteLaunchDate : 2017-12-12T14:45:59.941Z
UnitCount : 1
UnspscCode : 40141700
ValveType : Globe Valve