Cart 2 india

Specification
AgeRangeDescription : adult
Brand : easytooly
BulletPoint : Valves
BulletPoint1 : Type: FNPT Thread to LOK Fractional Tube Connector
BulletPoint2 : Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.
BulletPoint3 : Contribute to productivity improvement because of machined surfaces on the inner finishing.
BulletPoint4 : Assembled easily without the requirement of any special tools.
BulletPoint5 : Excellent finish level to allow smooth flow transition.
Color : One Color
Department : unisex-adult
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier : 8383888271055
ItemName : 1PC SS316L Female Elbow NPT - LOK 1/8 1/4 3/8 1/2 3/4 inch Tube Fitting 3000psig High Pressure(1/8 * 1/4 INCH)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : compression-fitting-nuts
Manufacturer : easytooly
ModelName : easytooly
ModelNumber : easytooly
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : easytooly
ProductDescription : 1PC SS316L Female Elbow NPT - LOK 1/8 1/4 3/8 1/2 3/4 inch Tube Fitting 3000psig High Pressure

Connection: Female
Head Code: Hexagon
Type: Elbow
Material: 316 Stainless Steel

Features
Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.
Contribute to productivity improvement because of machined surfaces on the inner finishing.
Assembled easily without the requirement of any special tools.
Excellent finish level to allow smooth flow transition.

Application: For inert gas, reactive, flammable, oxidizing and gas mixtures, Purity max.
Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.
1. Tubing hardness must be less than that of the ferrules.
2. Tubing should be away of finishing imperfections, defects and round in shape.
3. Tubing ends must be cut squarely and perpendicular to the center-line of the tubing. After the tubing is cut it must be deburred on both the inside and outside with a fully sharpened deburring tool.
ProductSiteLaunchDate : 2025-05-13T08:43:35.115Z
Size : 1/8*1/4 INCH
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39121400